Greyghost 1971 C10 l83/6l80E Build
4 Attachment(s)
Starting a new post to document and possible obtain help for my build. Ill post some before and after pics of the build. This is my first time doing anything like this and it has been fun and I have wanted to give up a few times but kept going. I started out with a 1971 C10 long bed, cut it down using the bothers kit. It had an old 305 in it which I sold in order to get a L83/6l80 motor for a fairly reasonable price. I've done most of the patch paneling and body work already and rebuilt the front end as well as interior. Here are some photos of the journey.
|
Re: Greyghost 1971 C10 l83/6l80E Build
5 Attachment(s)
Fast forward a bit:
|
Re: Greyghost 1971 C10 l83/6l80E Build
4 Attachment(s)
Stripped down again and adding power steering gear.
|
Re: Greyghost 1971 C10 l83/6l80E Build
5 Attachment(s)
Picked up L83 / 6l80E combo and this is where the fun begins:
|
Re: Greyghost 1971 C10 l83/6l80E Build
5 Attachment(s)
More pics of L83 purchase
|
Re: Greyghost 1971 C10 l83/6l80E Build
2 Attachment(s)
Problems so far:
1. I need to find some adapter plates or mounts that work with the SBC perches and would allow me to keep the belt driven vacuum pump and low mount AC. Not trying to spend 500$ on mounts as well. The Dirty Dingo plates states "Will not clear driver's side vacuum pump on truck engine" The KwikPerformance kit seems like the way to go but you have to purchase the brackets for 500$ and then a new AC compressor for another 250$ The dirty Dingo Sliders were my next option but still the same message, will not clear low mount ac or vacuum pump.... There has to be a way. |
Re: Greyghost 1971 C10 l83/6l80E Build
quite a fast forward there.
where and what did you pay for the motor/trans if you dont mind? |
Re: Greyghost 1971 C10 l83/6l80E Build
Quote:
I actually found the guy on offer up, I paid $1450 for the engine and transmission delivered. 12000 miles complete dropout. Too good to pass up and that discount was due to not have air box lol. |
Re: Greyghost 1971 C10 l83/6l80E Build
I’m currently getting the motor mounts done. Got some pics and looks promising. Vacuum pump still in and SAE headers fit nice.mounts From Metaltek in Michigan
|
Re: Greyghost 1971 C10 l83/6l80E Build
Quote:
|
Re: Greyghost 1971 C10 l83/6l80E Build
I can’t load pic for some reason. I would call Jaime from Metaltek. Super nice guy
|
Re: Greyghost 1971 C10 l83/6l80E Build
Quote:
I don’t know how you found that company but their website looks promising and looks like it maybe worthwhile for the price. I will call and see what he can do. Thanks man I’ll post some updates here to help future gen v swappers. |
Re: Greyghost 1971 C10 l83/6l80E Build
Quote:
|
Re: Greyghost 1971 C10 l83/6l80E Build
Greyghost what are u doing for fuel system
|
Re: Greyghost 1971 C10 l83/6l80E Build
Pm sent greyghost
|
Re: Greyghost 1971 C10 l83/6l80E Build
Quote:
I have some ideas that I will try to post when I get some time. 87chevy has been giving me some good advice. |
Re: Greyghost 1971 C10 l83/6l80E Build
Do you have contact info for Jamie at Metaltek? Doing L83 in 72 C10
|
Re: Greyghost 1971 C10 l83/6l80E Build
Quote:
|
Re: Greyghost 1971 C10 l83/6l80E Build
1 Attachment(s)
It appears the mounts and transmission crossmember are ready for ordering. Just ordered both and will update/review once received.
|
Re: Greyghost 1971 C10 l83/6l80E Build
MetalTek makes a nice product but ouch! I bought their $90 Gen5 weld in mounts off of eBay with free shipping... that seemed like a reasonable price to me. The new bolt in set with crossmember is $378! (plus shipping I imagine ). Maybe I should make a few sets to sell, I think materials would only be about $30-40. I guess their price is pretty good if one is not able to weld... I remember those days, it was often the limiting factor to many of my plans back when I was a younger man.
*Edit* I guess I was feeling cheaper than normal when I wrote this, I'd like to redact my comment that the price is high. It is a good price really. I just ordered the Metaltek trans crossmember, shipped to my door for a total of $159. Considering I spent a whole day off work to built one, and it still needs modifications to be strong enough, I will save my time and slap theirs in and feel confident! Side note: I now have a sub-par fairly flimsy crossmember for sale. LOL. (not really, it will be used in some form later as its now in my scrap pile.) |
Re: Greyghost 1971 C10 l83/6l80E Build
Quote:
|
Re: Greyghost 1971 C10 l83/6l80E Build
Quote:
|
Re: Greyghost 1971 C10 l83/6l80E Build
I just ordered mine, engine mounts and trans cross member powder coated for $435 and free shipping.
|
Re: Greyghost 1971 C10 l83/6l80E Build
Quote:
|
Re: Greyghost 1971 C10 l83/6l80E Build
When I bought the engine and trans from Stricker auto, I also bought the OEM pump and ecm. I had Mitch from Swaptimeusa add the wiring to my harness. I will have a guy in tow build a tank that will house the pump.
|
All times are GMT -4. The time now is 06:09 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com