The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Pre 1947 Chevrolet & GMC Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=208)
-   -   OR 1942 / 1946 passenger side headlight mount/bucket assembly (https://67-72chevytrucks.com/vboard/showthread.php?t=683031)

DLTruck1973 09-22-2015 12:49 PM

1942 / 1946 passenger side headlight mount/bucket assembly
 
5 Attachment(s)
Here is a very nice passenger side headlight mount/bucket assembly. Correct for the 1942 and 1946 model years.

This is an NOS piece that has never been mounted. It was bead blasted and primed to remove shelf wear. This is a nice piece with no rust or pitting. Comes with the wiring harness for the light.

Pleas ask any questions you have.

$175.00 plus shipping.

Thank you for looking.

Thomas

Todd68Chevy 09-24-2015 07:45 AM

Re: 1942 / 1946 passenger side headlight mount/bucket assembly
 
Very nice. I did not know that you had parts stashed for these trucks also. Do you happen to have any 40-46 rear truck fenders, the valance panel below the grill that has the holes for the bumper brackets to go through or a windshield frame?

DLTruck1973 09-24-2015 11:21 AM

Re: 1942 / 1946 passenger side headlight mount/bucket assembly
 
Quote:

Originally Posted by Todd68Chevy (Post 7318607)
Very nice. I did not know that you had parts stashed for these trucks also. Do you happen to have any 40-46 rear truck fenders, the valance panel below the grill that has the holes for the bumper brackets to go through or a windshield frame?

Hi Todd,

We don't actually have parts trucks here or parts stashed. These are some left overs from a restoration that Tom's father is doing.


I will ask him about the fenders, lower valance and windshield frame for you.

Thank you,
Thomas

Todd68Chevy 09-24-2015 11:41 AM

Re: 1942 / 1946 passenger side headlight mount/bucket assembly
 
Quote:

Originally Posted by DLTruck1973 (Post 7318797)
Hi Todd,

We don't actually have parts trucks here or parts stashed. These are some left overs from a restoration that Tom's father is doing.


I will ask him about the fenders, lower valance and windshield frame for you.

Thank you,
Thomas

Sounds good, Thanks

DLTruck1973 09-29-2015 01:29 PM

Re: 1942 / 1946 passenger side headlight mount/bucket assembly
 
Headlight mount/bucket price reduced to $150.00

Thank you,
Thomas

DLTruck1973 09-29-2015 01:31 PM

Re: 1942 / 1946 passenger side headlight mount/bucket assembly
 
Quote:

Originally Posted by Todd68Chevy (Post 7318819)
Sounds good, Thanks

Hey Todd,

He has a right rear fender but it has a sale pending for $500.00 plus the shipping. Very nice piece of original GM metal.

He also has a rather beat up front valance and a windshield frame that he says is not a very nice one.

Thank you,
Thomas

Todd68Chevy 10-04-2015 09:38 AM

Re: 1942 / 1946 passenger side headlight mount/bucket assembly
 
Quote:

Originally Posted by DLTruck1973 (Post 7323795)
Hey Todd,

He has a right rear fender but it has a sale pending for $500.00 plus the shipping. Very nice piece of original GM metal.

He also has a rather beat up front valance and a windshield frame that he says is not a very nice one.

Thank you,
Thomas

Thomas, Thanks for checking. Sounds like the fender with shipping will probably be out of my budget range. If it does not sale then I would not mind pictures and an idea on shipping cost if it is in real good shape. Would not mind getting a price and seeing a picture of the valance panel if you get a chance but sounds like it might not be much better then the ones I already have. I will pass on the windshield frame. Thanks, Todd

Todd68Chevy 03-11-2016 09:40 PM

Re: 1942 / 1946 passenger side headlight mount/bucket assembly
 
Quote:

Originally Posted by DLTruck1973 (Post 7323795)
Hey Todd,

He has a right rear fender but it has a sale pending for $500.00 plus the shipping. Very nice piece of original GM metal.

He also has a rather beat up front valance and a windshield frame that he says is not a very nice one.

Thank you,
Thomas

Thomas, Did the rear fender sell? If it did not sell then can I get some pictures and a shipping quote to a business address in Zip code 47882. Thanks

DLTruck1973 03-11-2016 11:44 PM

Re: 1942 / 1946 passenger side headlight mount/bucket assembly
 
Yes the fender sold some time ago.
Thanks, Tom


All times are GMT -4. The time now is 09:43 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com