The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   WA Parting 77 4x4 (https://67-72chevytrucks.com/vboard/showthread.php?t=396067)

bikes&bowties 04-06-2010 01:02 AM

Parting 77 4x4
 
Decided to put everything for sale. If there is something you need thats not listed just ask.. All parts are OBO.. It is tan interior (saddle i believe)

if you need something and dont see it, it doesnt hurt to ask:metal:

Headlight switch-$7
Rear view mirror-$7
Sun visors-$15
Brown dashpad in good shape-$40
Gauge bezel (one corner is cracked)-$7
Tube grill-$10
Headlight bezels-Sold
Emergency brake assembly-$10
Side running lights, amber-$20 set
Interior trim -$25
Trim on dash pad-$15
Door panels-$25
Power steering box-$25
Steering column (non tilt)-Sold
battery gauge-$5
speedometer gauge the indicator needle is starting to break off. Not sure if it works because it wasnt hooked up.-$5
door hinges-$20
hood hinges-$25
oil & water temp gauges-Sold
outside mirrors-Sold
Rear sliding window (has stickers on it)-$25
brake booster-$40
Windshield wiper motor-$20



Pick Up only parts
305 small block, mileage unknown but runs pretty good. Needs some new gaskets and its oily:)-$100
SM465 mated to np205 (new oil)-$350 but willing to separate if someone is serious
front 10 bolt axle (4:10 gears)-$100
front 10 bolt axle (3:08 gears)-$100
rear 10 bolt axle (3:08 gears)-$100
Cab (could be good for parts ask about damage spots)-$50
doors (good minus big dent on drivers side, no locks:))-$45 for both
Core support (has some rust under battery areas, not sure how bad ATM)-$30
Passenger side fuel tank-$40
Driver side fuel tank-$40
Driver side fuel tank-$40
Bench seat in bad shape-$25
Front fenders-Free

not for sale...
Shifters/shifter knobs
grant steering wheel
flatbed
driveshafts
stereo
brake/clutch pedal assembly/linkage

bikes&bowties 04-06-2010 01:06 AM

Re: Parting 77 4x4
 
A few pics to start off...

http://i254.photobucket.com/albums/h...4101733-02.jpg
http://i254.photobucket.com/albums/h...4101733-01.jpg
http://i254.photobucket.com/albums/h...4101733-00.jpg
http://i254.photobucket.com/albums/h...2101429-00.jpg

bigblock73 04-06-2010 06:45 AM

Re: Parting 77 4x4
 
Can you get me a picture of the cab corner interior trim pieces, specifically the passenger side? I need to see if they are the short versions that end at the bottom of the window, or if they are the longer ones that go down further. Also, their condition (any extra holes driller or cracks?), price, and shipping to 55448. Thanks.

bigdnew 04-06-2010 07:49 AM

Re: Parting 77 4x4
 
picture of tube grill, please and what about the radio.

Gary66 04-06-2010 11:45 AM

Re: Parting 77 4x4
 
are there any cracks in the dash?? what would it and the door panels be shipped to 62906?
Thanks

Stitch 04-06-2010 08:35 PM

Re: Parting 77 4x4
 
door locks? :D

bikes&bowties 04-06-2010 09:57 PM

Re: Parting 77 4x4
 
Quote:

Originally Posted by Fat Hoe (Post 3904956)
door locks? :D

THATS WHAT I WAS FORGETTING!!!!!!!! I was like "gahhh I know there is something else" I will get to that right after I post the pictures for these other gentleman:metal:

Stitch 04-06-2010 10:19 PM

Re: Parting 77 4x4
 
no problem...I can't remember or not, did you ship out my other stuff yet? if not, you can put those in with them...just give me a price...

bikes&bowties 04-06-2010 10:56 PM

Re: Parting 77 4x4
 
Quote:

Originally Posted by Fat Hoe (Post 3905252)
no problem...I can't remember or not, did you ship out my other stuff yet? if not, you can put those in with them...just give me a price...

yes I did already ship your stuff. It should be there very soon...

here are a couple pics of the locks... $15 shipped

http://i254.photobucket.com/albums/h...6101931-00.jpg
http://i254.photobucket.com/albums/h...6101932-00.jpg

bigblock73 04-06-2010 11:28 PM

Re: Parting 77 4x4
 
Door lock pics...but where are the rest as promised? :(

bikes&bowties 04-06-2010 11:29 PM

Re: Parting 77 4x4
 
Cab corner trim is in very good condition with no extra holes... (minus that little black hanger but i believe its stock since my 84 also has it... it goes like 7 inches below the rear window line..
http://i254.photobucket.com/albums/h...6101745-00.jpg
http://i254.photobucket.com/albums/h...6101745-02.jpg
Im almost positive the black spot will wash off..
http://i254.photobucket.com/albums/h...6101755-00.jpg

bikes&bowties 04-06-2010 11:30 PM

Re: Parting 77 4x4
 
Dashpad is not quite as nice as I previously had thought... I actually am thinking its a painted blue dash its got a couple small cracks and a little ding on the passenger side below the trim.... Still looks pretty good though... I tried my best to picture the worse parts. then I have some pictures of the door panels... they are now off if you would like more detailed pictures of something... $70 without shipping for it all.. I will have to get it boxed up to figure out shipping.

this is the the vent on the driver side...
http://i254.photobucket.com/albums/h...6101747-03.jpg

around the speakers
http://i254.photobucket.com/albums/h...6101747-05.jpg
http://i254.photobucket.com/albums/h...6101756-00.jpg

then down under the trim on the passenger side
http://i254.photobucket.com/albums/h...6101804-01.jpg
http://i254.photobucket.com/albums/h...6101804-00.jpg
http://i254.photobucket.com/albums/h...6101804-02.jpg
http://i254.photobucket.com/albums/h...6101803-01.jpg

bikes&bowties 04-06-2010 11:33 PM

Re: Parting 77 4x4
 
door panels
http://i254.photobucket.com/albums/h...6101803-00.jpg
http://i254.photobucket.com/albums/h...101802-012.jpg
http://i254.photobucket.com/albums/h...6101802-02.jpg
http://i254.photobucket.com/albums/h...6101802-00.jpg


grill
http://i254.photobucket.com/albums/h...6101744-00.jpg
http://i254.photobucket.com/albums/h...6101744-01.jpg
http://i254.photobucket.com/albums/h...6101750-00.jpg

stereo
http://i254.photobucket.com/albums/h...6101806-01.jpg

bigblock73 04-06-2010 11:34 PM

Re: Parting 77 4x4
 
Thanks for the pics, but I am going to pass...I need the older version of the cab trim...the shorter one. Thanks for the pictures and description though.

bikes&bowties 04-06-2010 11:47 PM

Re: Parting 77 4x4
 
Quote:

Originally Posted by bigblock73 (Post 3905463)
Thanks for the pics, but I am going to pass...I need the older version of the cab trim...the shorter one. Thanks for the pictures and description though.

alright.. good luck finding what you need!



Some more pictures....

glovebox
http://i254.photobucket.com/albums/h...6101748-00.jpg
http://i254.photobucket.com/albums/h...6101748-01.jpg
http://i254.photobucket.com/albums/h...6101748-02.jpg

gauge bezel
http://i254.photobucket.com/albums/h...6101747-02.jpg

mirror
http://i254.photobucket.com/albums/h...6101747-00.jpg
http://i254.photobucket.com/albums/h...6101747-01.jpg

Rogue_Sentinel 04-06-2010 11:58 PM

Re: Parting 77 4x4
 
pm
Door panels

bigdnew 04-07-2010 07:05 AM

Re: Parting 77 4x4
 
think i'll pass on grill and radio, thanks

bikes&bowties 04-07-2010 10:16 PM

Re: Parting 77 4x4
 
Edited. Everything is for sale... Basically nothing is taken off though:lol:

USSkoval 04-07-2010 10:40 PM

Re: Parting 77 4x4
 
Does the tach work?

bikes&bowties 04-07-2010 11:15 PM

Re: Parting 77 4x4
 
Its not for sale. Its one of the things I wanted. Sorry.

71blksuper4x4 04-07-2010 11:39 PM

Re: Parting 77 4x4
 
How much for the transfer case knob? Trevor

USSkoval 04-07-2010 11:41 PM

Re: Parting 77 4x4
 
Quote:

Originally Posted by bikes&bowties (Post 3907506)
Its not for sale. Its one of the things I wanted. Sorry.

That's cool. But now I'm still curious if it works, lol.

bikes&bowties 04-07-2010 11:53 PM

Re: Parting 77 4x4
 
Quote:

Originally Posted by USSkoval (Post 3907590)
That's cool. But now I'm still curious if it works, lol.

yes it does. but when I turn it off it goes to 4500 or so rpm... not sure if this is normal... is honestly the only factory tach in these trucks I have ever seen in person. :lol:

bikes&bowties 04-07-2010 11:54 PM

Re: Parting 77 4x4
 
Quote:

Originally Posted by 71blksuper4x4 (Post 3907582)
How much for the transfer case knob? Trevor

Also keeping that.. Man I need to make a list of not selling stuff.. I'm sorry

centexan 04-08-2010 01:04 PM

Re: Parting 77 4x4
 
I am still interested in the Warn hubs if you willing to part them out. Thanks


All times are GMT -4. The time now is 01:09 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com