The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=205)
-   -   hi from aussie (https://67-72chevytrucks.com/vboard/showthread.php?t=482243)

codger30 08-31-2011 03:57 AM

hi from aussie
 
1 Attachment(s)
Attachment 793941
Hi to all you guys n gals. New to the forum here. We just purchased this one owner '48 truck and plan on a pickup build. It will be our daily driver when finished.
I used to drive a rodded '37 chev sedan as a daily, then an "A" roadster as often as I could, so the '48 should be fun.
Anyhow, as I said, new to here and have found this to be a great site.
Cheers, Bryan and Angela

AUSSIE54 08-31-2011 09:12 AM

Re: hi from aussie
 
G'day Codger,

She looks a real beauty!! I'll be watching with interest.
Good luck with the build!!!

Denee007 08-31-2011 09:46 AM

Re: hi from aussie
 
HI Codger, dne' here in Houston, TX! Nice flatbed!
dne'

solidaxel 09-10-2011 08:09 PM

Re: hi from aussie
 
Welcome from Southern Arizona !!

Keep us updated on your build.

T Hilde 09-11-2011 12:03 AM

Re: hi from aussie
 
Hey Codger welcome aboard. Get some interior shots for us. Never seen one with a backwards dash, well backwards from what we are use to seeing.

codger30 09-11-2011 09:35 AM

Re: hi from aussie
 
Quote:

Originally Posted by T Hilde (Post 4893057)
Hey Codger welcome aboard. Get some interior shots for us. Never seen one with a backwards dash, well backwards from what we are use to seeing.

No, no,no, you guys are the backward ones. We a half a day in front of you for starters. LOL
OK, will try to get time and take some pics in the morning.Thanks for the replys.
Bryan

Lextech 09-11-2011 05:10 PM

Re: hi from aussie
 
Welcome from "Up Over". Someone already stole my wise crack about the steering wheel.

Jeff

Red Foreman 09-11-2011 05:38 PM

Re: hi from aussie
 
Nice truck & starting point, I haven't seen a right hook factory AD before, does it have a Holden id tag? Where abouts in Austalia?

codger30 09-12-2011 06:33 AM

Re: hi from aussie
 
Quote:

Originally Posted by Red Foreman (Post 4893946)
Nice truck & starting point, I haven't seen a right hook factory AD before, does it have a Holden id tag? Where abouts in Austalia?

Yep, it does have a holden ID tag. Ten minutes out of Dimboola, 25 mins past Horsham.
What is an AD??? have seen the term on here a bit. While I am at it, what is the difference between the years, say '47 to '52?
It's good to get back into this chev as I drove a '37 street rodded sedan for about 6 years as my daily driver.http://005.jpg

codger30 09-12-2011 06:34 AM

Re: hi from aussie
 
another pic.
http://008.jpg

codger30 09-12-2011 06:35 AM

Re: hi from aussie
 
and one more.
http://009.jpg

Red Foreman 09-12-2011 08:36 AM

Re: hi from aussie
 
Advance Design, with a Holden ID chances are it was built here, Fishermans Bend, Dandenong or Adelaide. I'll ask the old man if they built'em here, he worked in GM Dandenong from the 60s until 79, he might know some history on them? Cheers!

codger30 09-12-2011 07:27 PM

Re: hi from aussie
 
Cool, that would be great. The old guy I bought it from has a bit of memory loss going on, & can't remember a lot about it.
Bryan

Barney Rubble 09-13-2011 01:15 AM

Re: hi from aussie
 
welcome codger, will be good to get daytime thread updates instead of middle of the night!


All times are GMT -4. The time now is 11:36 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com