The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)

- - Narrowed Rear With OE Trailing Arms? (https://67-72chevytrucks.com/vboard/showthread.php?t=827475)

JDon99

11-03-2021 11:42 AM

Narrowed Rear With OE Trailing Arms?

I'm gathering up parts for my 66 SWB street/strip build, and looking to have a 9 inch built by Strange for the trialing arm setup. I was considering going slightly narrower than the stock width(2" per side). Have any of you guys ran a setup like this? I just want to make sure there won't be any clearance issues. Thanks fellas!

SCOTI

11-03-2021 04:58 PM

Re: Narrowed Rear With OE Trailing Arms?

Quote:

Originally Posted by JDon99 (Post 8991471)

At 2" per end, you shouldn't run into any issues. E-brake cable routing/attachment might require finesse depending on the set-up (might).

JDon99

11-03-2021 05:30 PM

Re: Narrowed Rear With OE Trailing Arms?

Quote:

Originally Posted by SCOTI (Post 8991547)

At 2" per end, you shouldn't run into any issues. E-brake cable routing/attachment might require finesse depending on the set-up (might).

I'll probably go with a set of Wilwoods with a. 11 or 12" rotor.

All times are GMT -4. The time now is 02:49 AM.