Re: T-Man's 58 Apache project
 

its lookin good tyler! finish that bedside and start sandin! :lol:

Re: T-Man's 58 Apache project
 

Kick ass job so far.

Ratty 46

Re: T-Man's 58 Apache project
 

Nice work

Re: T-Man's 58 Apache project
 

Tyler and I worked on his truck. We worked on closing in stake holes in top of box and modifying front edge of box. here are a few pictures

Re: T-Man's 58 Apache project
 

Pictures with box on truck

Re: T-Man's 58 Apache project
 

good job tyler looks good i wanna weld up the stake pockets onmy 67 fleetside

Re: T-Man's 58 Apache project
 

I was wondering if anybody had any advise. I have put drive train out of a 96 chev half ton in this 58 truck we are working on can the wiring harness be fit into the 58 can use all the help I can get. Is there a wiring harness you can buy for this. Any help would be appreciated

Re: T-Man's 58 Apache project
 

I was showing this to my brother, and since you guys were concerned about making the box fit better with the cab, he suggested removing the rubber cab mounts and using steel washers, and making the cab and the box a unibody like Ford did, or similar to an
Elcamino, by bridging the gap between the box and cab with sheet steel.

Re: T-Man's 58 Apache project
 

Looking great Don and Tyler!!! Makes me want to get started on my project again.

Re: T-Man's 58 Apache project
 

Tyler went home today, but before he went home we cleaned the shop . I worked on rear of fleet side , here is hoping I did ok.

Re: T-Man's 58 Apache project
 

WOW!!!!!!!!!!! I can not believe my eyes at all, lthe truck looks amazing, it is really coming along nicely, the gaps on the door are awesome, the box edge turned out great!!!!!!!!!! The two of you must be proud of how that is coming along, it looks great!!! As for the wiring, I would almost say we should talk to Tony up here. he would be the best around if we needed anything. keep it coming along. I guess it is getting close to the time where money has to be spent on some things. Such as the A/C, rad, condensor, wiring, bed floor interior and paint. Time to start saving money Tyler.

Re: T-Man's 58 Apache project
 

Tyler is in the city working now,so time for dad to do a little work on his truck. I finished left rear fleetside,then after talking to James and Tyler decided we needed a lot of help with the wiring. We got in touch with a friend of James's(lucky he has alot of them) I drove in to the city to talk with Tony was blown away by all the information and stuff this man has. I am sure he will do an excellant job,also may have found a few more things that we will need like AC/heater rad fan. James also has manage to find a radiator and a set of headers,so things are moving along. The next day I measured the drive shaft,so I can take somewhere to get cut down. We had a small break in the weather -14 celcius so I did a litlle sandblasting here are a few pictures

Re: T-Man's 58 Apache project
 

I decided to work on a few things that were not sheet metal for a few days. I have got power steering hoses made,found U-joint for drive shaftand had drive shaft shortened. I then shortened fuel pump from 13 inches deep to 10 inches deep, here are some pictures.

Re: T-Man's 58 Apache project
 

Looking mighty fine!

Re: T-Man's 58 Apache project
 

Looking mighty fine guys, I sent home the hinge pin bushing kit for the drivers door, hope to see it hung on there real soon, and thought i would post a couple of pics i took also.

Re: T-Man's 58 Apache project
 

Looks good all put together.
Kim

Re: T-Man's 58 Apache project
 

Tyler was home on weekend so we worked on fleetside and hanging drivers door. Tyler did the sanding on box and I hung the door.A few pics

Re: T-Man's 58 Apache project
 

Looks great guys, those gaps are needing a bit of a trim!!! lol, getting there thou.

Re: T-Man's 58 Apache project
 

Awesome man!!!!!!!!!!!!! It's looking good man!!:metal::metal:

Re: T-Man's 58 Apache project
 

I thought it was time to post a few more pictures to proof to the city boys that I am still working. Slow and steady

Re: T-Man's 58 Apache project
 

There we go!!! getting there, but where are the pics of the [headers also??? slacker

Re: T-Man's 58 Apache project
 

I am sad to say that another winter has gone by and I have to put Tyler's truck away. I seem to have time to work on it in the summer. Someone has been calling me a slacker so here are a few more pictures

Re: T-Man's 58 Apache project
 

SORRY should have read little time to work on it in the summer. a few of the box after it was primed

Re: T-Man's 58 Apache project
 

Cool progress

Re: T-Man's 58 Apache project
 

Truck looks amazing Tyler and Don!!!!! great job, we will have to find some time in the future to get the bodywork done to her now and get her mudded /primed/sanded then PAINTED!!!