The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - 65 c10 rockers (https://67-72chevytrucks.com/vboard/showthread.php?t=851026)

dmb	02-29-2024 08:34 PM

65 c10 rockers

2 Attachment(s)

I have started on my 65 long bed Have the drivers side going back together
I bought the qt of seam sealer, you brush it on. I might should have got the tube. The drip rail is next

Lokin4AReason

03-01-2024 11:49 AM

Re: 65 c10 rockers

looking good so far . . .

Grounded63

03-01-2024 04:45 PM

Re: 65 c10 rockers

A couple things that can help keep seam sealers in line. Is to tape off either side of where you want them. You can also use a wax & grease remover like ppg dx330. On a small brush or your gloved finger. ( nitrile/latex) To help smooth/blend/texture the seam sealer.

All times are GMT -4. The time now is 06:27 AM.