The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Related (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=225)
-   -   Another Header Thread (https://67-72chevytrucks.com/vboard/showthread.php?t=823424)

lts70 07-05-2021 10:11 AM

Another Header Thread
 
1 Attachment(s)
On my boys 1968 we bought an engine that already had LS motor mount adapters on the block. The adapter plates had two positions that could be used, a forward or rear set up. Even with the motor mounts in the forward position our oil pan (Engines original owner said it was a GMperformance pan) just barely didn’t clearance the crossmember. We were able to move The motor mount perchs to the six cylinder location and make things work clearance wise.

Wondering if anyone else has ran things in this configuration or had any advice on what exhaust headers to use that would clear?

lts70 03-18-2022 12:56 PM

Re: Another Header Thread
 
1 Attachment(s)
My Boy won the VFW Patriots Pen competition for our community and they handed him a $200 check. So we ordered the speed engineering long tube headers. I was so proud that he won and what he wanted to do with his money that I told him I would cover the difference. I sure hope they fit because even after chopping off the flange and cutting away some of the heatshield the truck manifolds did not.


https://speed-engineering.com/collec...ls2-ls3-ls6-m2


All times are GMT -4. The time now is 02:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com