Exhaust Manifold Paint??????
I am having to replace my driver side exhaust manifold and I found one for 20 bucks. I am going to get it sand balsted to insure a good seal and I thought it would be a good time to dress it up a bit. I was wondering if any body has had any success with any of the high temp spray paints when trying to paint exhaust manifolds?????? :mm:
|
Re: Exhaust Manifold Paint??????
Would the high temp black spray paint for grills work? It did for my intake manifold and valve covers but of course they don't get as hot.
|
Re: Exhaust Manifold Paint??????
That is what I was thinking but like you said valve covers do not get as hot as exhaust manifolds.
|
Re: Exhaust Manifold Paint??????
|
Re: Exhaust Manifold Paint??????
I use the Eastwood manifold paint on mine.
Posted via Mobile Device |
Re: Exhaust Manifold Paint??????
try the por 15 manifold paint. used it a couple of times looks great and holds up well, you can actually brush it on it is self leveling
|
Re: Exhaust Manifold Paint??????
Eastwood factory grey high temp paint.
|
Re: Exhaust Manifold Paint??????
Any autoparts store sells the 1500 or 2000 degree paint in silver or black. I dunno the brand name but i got it in silver and painted the exhaust housing of my 60/16 cm H1c hybrid turbo on my diesel. I have had her up to around 1500 degrees via pyro and the paint still looks pretty good.
|
Re: Exhaust Manifold Paint??????
I have good luck with the Eastwood factory grey also. Just brush it on. My small block manifolds are getting kind of crusty looking now but that was ten years ago too.
|
Re: Exhaust Manifold Paint??????
1 Attachment(s)
Quote:
I used the Eastwood factory gray and am happy with the results. FOLLOW THE DIRECTIONS. If memory serves, the fumes coming off the paint when it first cures is not intended for your lungs. After that you should be good to go. I think they turned out good if I do say so myself... |
Re: Exhaust Manifold Paint??????
i use por 20 high temp. lasted for years on my daily driver. i have heard similar with eastwood.
Posted via Mobile Device |
Re: Exhaust Manifold Paint??????
Quote:
|
Re: Exhaust Manifold Paint??????
ive heating the manifolds up and sprayed them hot the paint boils and drys up fast then recote a few times doing the same you get a decent finish and it hold up well
|
Re: Exhaust Manifold Paint??????
Quote:
|
Re: Exhaust Manifold Paint??????
Hey guys does anyone know what type of product to use in the drip moldings of a 72 cab, looks like epoxy?
|
Re: Exhaust Manifold Paint??????
I use the calyx brand. its not a paint and it does not burn off
|
Re: Exhaust Manifold Paint??????
I also use POR 15 Exhaust Manifold Paint. Stays on and looks great. POR 15 is good stuff.
|
Re: Exhaust Manifold Paint??????
Quote:
http://i557.photobucket.com/albums/s..._4287073_n.jpg http://i557.photobucket.com/albums/s..._7151313_n.jpg http://i557.photobucket.com/albums/s...toshoot039.jpg |
Re: Exhaust Manifold Paint??????
What is this Calyx brand? Never heard of it and where do you buy this?
|
Re: Exhaust Manifold Paint??????
Here's there website. We bought ours through Eastwood.
http://calyxmanifold.com/ From Eastwood: http://www.eastwood.com/calyx-manifold-coating.html http://www.eastwood.com/media/catalo...ea1/p20619.jpg |
Re: Exhaust Manifold Paint??????
OK, thanks.
|
All times are GMT -4. The time now is 04:22 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com