4L80e transmission lines!
1 Attachment(s)
Anybody have a picture of the correct factory hard lines going into the raditor from a 4L80e transmission, like on a stock c20 (99-06) Silverado? I am trying to put a 4L80e into my Squarebody but the hard lines are WAY off (like the hard lines were misbuilt-they are not lining up with anything).It would be really helpful if I had a picture of how the factory did their tranny lines to the Radiator
I am looking for a photo similiar to the one below with the yellow circle around them, but with both hard lines shown? |
Re: $L80e transmission lines!
T800 4L80E lines will be JiffyTite push in fittings.
There should be three lines. Two long and one short.
I would use an external cooler if you tow with it. There's an upgrade setup for installing the Hayden TruCool LPD cooler using the JiffyTite fittings. If you have a Mastercool hydraulic tool you can make up your own JiffyTite lines to screw in fittings. https://ae01.alicdn.com/kf/Sc7773560...9801bfec1T.jpg |
Re: $L80e transmission lines!
1 Attachment(s)
Quote:
I obtained this picture which I believe shows the lines as the factory would have shipped it? |
All times are GMT -4. The time now is 12:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com