The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Electrical (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=64)
-   -   please help me idenitify these wires (https://67-72chevytrucks.com/vboard/showthread.php?t=723112)

Knixon804 11-22-2016 10:19 PM

please help me idenitify these wires
 
cleaning up my engine bay for my ls swap and i cant figure out what these 2 sets of wires are. the first one comes out of the firewall on the passenger side right by the ac wiring, the second one comes out on the drivers side right by the main bulkhead fitting..i dont think either of them were plugged in on my 305.

http://i166.photobucket.com/albums/u...psgpnawu2w.jpg
http://i166.photobucket.com/albums/u...psvwrsreuu.jpg
http://i166.photobucket.com/albums/u...pspxqiyahz.jpg

Bigdav160 11-23-2016 09:26 AM

Re: please help me idenitify these wires
 
I can't figure out the year of your truck but the vacuum switch on the firewall was probably for the lock up torque converter clutch in the transmission.

The flat 4 pin terminal, I would guess, is for the spark control HEI. Is this a '84? '85?

Knixon804 11-23-2016 09:44 AM

Re: please help me idenitify these wires
 
I figured it out. You have it right. It's a 84 k5 blazer. Sorry I didn't specify it's in my signature


All times are GMT -4. The time now is 07:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com