The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Alternator Pulley Issues - BBC (https://67-72chevytrucks.com/vboard/showthread.php?t=721010)

KyleSeal 10-24-2016 10:52 PM

Alternator Pulley Issues - BBC
 
Having issues with alternator pulley. 1984 K30 454 w/ac.

First started when the alternator belt flew off and got destroyed on the fan, and resulted in a new alternator, but it still slips and will literally burn its way off. I fired it up the other day with a new belt, tight as I can get it, for 20 seconds tops. Belt was real hot. Other belts still ice cold.

Whats going on? Alignment is good. Not sure where to go.

TrailerTrash 10-24-2016 11:23 PM

Re: Alternator Pulley Issues - BBC
 
lets see some pics of your pulleys and belts setup.

is there any squealing of the belt?

KyleSeal 10-25-2016 12:51 AM

Re: Alternator Pulley Issues - BBC
 
Quote:

Originally Posted by TrailerTrash (Post 7751486)
lets see some pics of your pulleys and belts setup.

is there any squealing of the belt?

I'll get some up soon.

GRADYS Performance 10-25-2016 11:24 AM

Re: Alternator Pulley Issues - BBC
 
Charge your battery before starting. A low battery puts a lot of load on the belt and pulley.

KyleSeal 10-25-2016 08:57 PM

Re: Alternator Pulley Issues - BBC
 
Belt squeals loads before - I put a pulley from a SB350 alternator on the new alternator, and belt dressing, and drove some and it seemed okay... the battery was recharged by a local Carquest, and seems to be holding strong at 13.5/14.

kdh454 10-26-2016 05:30 PM

Re: Alternator Pulley Issues - BBC
 
This is probably not your problem, but I'll leave it here in case someone happens to make the same mistake I did.

I had a similar issue years ago after installing the engine in my Chevelle - alternator belt squeaked like crazy, got hot, and flew off. After several attempts at tightening and replacing the alternator, I pulled off all the pulleys to clean them up. Only then I realized the problem was mismatched water pump and crank pulleys. I don't remember exactly which was which, but I believe the crank had two identical pulleys and the water pump had one large and one small pulley. Basically, the alternator belt was being forced to slip around one of the pulleys, got fed up with it, and decided to end it's miserable life by being chopped to bits by the fan. I swapped out one of the pulleys, and all was right again.

TrailerTrash 10-26-2016 11:14 PM

Re: Alternator Pulley Issues - BBC
 
Quote:

Originally Posted by kdh454 (Post 7752979)
This is probably not your problem, but I'll leave it here in case someone happens to make the same mistake I did.

I had a similar issue years ago after installing the engine in my Chevelle - alternator belt squeaked like crazy, got hot, and flew off. After several attempts at tightening and replacing the alternator, I pulled off all the pulleys to clean them up. Only then I realized the problem was mismatched water pump and crank pulleys. I don't remember exactly which was which, but I believe the crank had two identical pulleys and the water pump had one large and one small pulley. Basically, the alternator belt was being forced to slip around one of the pulleys, got fed up with it, and decided to end it's miserable life by being chopped to bits by the fan. I swapped out one of the pulleys, and all was right again.

I had this exact same problem myself. that is why i asked for pictures of the pulleys:lol:

KyleSeal 10-27-2016 09:10 PM

1 Attachment(s)
Posted via Mobile Device

KyleSeal 10-27-2016 09:11 PM

1 Attachment(s)
This is the fan pulley. The first is the alternator.
Posted via Mobile Device

TrailerTrash 10-28-2016 05:19 PM

Re: Alternator Pulley Issues - BBC
 
those arent exactly the kind of pictures we need although it does look like the belt sits in the alternator pulley pretty deep. is that belt always worn down?

we need some farther away pictures of all pulleys and belts. plus a top down view of them to see if the alignment is off.

as many pictures as you care to take

KyleSeal 10-28-2016 10:09 PM

Re: Alternator Pulley Issues - BBC
 
Quote:

Originally Posted by TrailerTrash (Post 7754842)
those arent exactly the kind of pictures we need although it does look like the belt sits in the alternator pulley pretty deep. is that belt always worn down?

we need some farther away pictures of all pulleys and belts. plus a top down view of them to see if the alignment is off.

as many pictures as you care to take

Belt is new. Only has a few miles on it, and doesnt squeak so I know it isnt worn down.


All times are GMT -4. The time now is 02:28 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com