The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Suspension Marketplace (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=210)
-   -   63-87 rack and pinion (https://67-72chevytrucks.com/vboard/showthread.php?t=465423)

robnolimit 05-20-2011 12:01 PM

63-87 rack and pinion
 
Next week (may 23-27) we will be posting up install picts of our new rack and pinion kit as it goes in. StreetTrucks will also be covering the install for an upcoming article. We are having the owner of the truck do the install himself, with an "out of the box" kit. These kits will go onsale starting June 1. Stay tuned for updates. Thanks.

Custom 68 05-20-2011 03:32 PM

Re: 63-87 rack and pinion
 
Awesome, I have also been waiting for some more info on your rear shock mounts and the long track bar you are showing on the JT project. I currently have adjustable shocks so I would be interested in a package deal without the shocks so I can use my QA1 shocks.
Thanks
David

robnolimit 05-20-2011 05:38 PM

Re: 63-87 rack and pinion
 
on the way soon

chapster 05-21-2011 03:20 AM

Re: 63-87 rack and pinion
 
Sounds good Rob,

I am to far along to use you kit but it is nice to see all the testing and R & D that is going into the new Rack & pinion kit before it is released.
:metal:

Hart_Rod 05-21-2011 10:06 PM

Re: 63-87 rack and pinion
 
Tempting......:D.

POPO1984 05-24-2011 09:37 AM

Re: 63-87 rack and pinion
 
Impatiently waiting

inovermyhead 05-24-2011 10:55 AM

Re: 63-87 rack and pinion
 
:wop:

:lol: someone had to do it. Can't wait to see the pics posted up.

doubleRdazz 05-26-2011 08:19 PM

Re: 63-87 rack and pinion
 
Looking forward to some pics
Posted via Mobile Device

gringoloco 05-30-2011 11:53 PM

Re: 63-87 rack and pinion
 
Did this happen? Or...

dnd1978 05-31-2011 07:38 PM

Re: 63-87 rack and pinion
 
Rob,

Will your rack & pinion setup work on a crossmember that has been section 1.5''

thanks

robnolimit 05-31-2011 11:02 PM

Re: 63-87 rack and pinion
 
Sorry, sorry, sorry, But, we wil post uo wed. I tried today, but our internet was down at the shop. pump and pulleys are on. First step done.

norwegianc10 06-02-2011 03:47 AM

Re: 63-87 rack and pinion
 
Subscribed

rob32472 06-02-2011 07:38 PM

Re: 63-87 rack and pinion
 
:smoke:

nds1968 06-06-2011 12:57 PM

Re: 63-87 rack and pinion
 
:sumo:

doubleRdazz 06-06-2011 01:48 PM

Re: 63-87 rack and pinion
 
Thought these were going to be ready for June 1st
Posted via Mobile Device

68GMCCustom 06-06-2011 02:20 PM

Re: 63-87 rack and pinion
 
where y'all at on this Rob?
Do we have pricing and availability yet?

robnolimit 06-07-2011 03:57 PM

Re: 63-87 rack and pinion
 
1 Attachment(s)
Jake (owner) installing the new p/s pump with a set of Bill's brackets.

robnolimit 06-07-2011 03:58 PM

Re: 63-87 rack and pinion
 
1 Attachment(s)
p/s pump and pulley

robnolimit 06-07-2011 04:00 PM

Re: 63-87 rack and pinion
 
1 Attachment(s)
Removing the outer tierod ends

robnolimit 06-07-2011 04:01 PM

Re: 63-87 rack and pinion
 
1 Attachment(s)
Removing the stock steering box

robnolimit 06-07-2011 04:18 PM

Re: 63-87 rack and pinion
 
2 Attachment(s)
Pulling out all of the stock steering

robnolimit 06-07-2011 04:20 PM

Re: 63-87 rack and pinion
 
1 Attachment(s)
The stock steering shaft goes too.

robnolimit 06-07-2011 04:21 PM

Re: 63-87 rack and pinion
 
1 Attachment(s)
Here is a shot of the main rack mounting brackets

robnolimit 06-07-2011 04:23 PM

Re: 63-87 rack and pinion
 
1 Attachment(s)
The two lower 'fingers' set the height of the brackets. The first locating hole is dead center on the crossmember.

robnolimit 06-07-2011 04:25 PM

Re: 63-87 rack and pinion
 
1 Attachment(s)
The production rack mount.


All times are GMT -4. The time now is 01:41 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com