Lap belt to shoulder belt conversion info
3 Attachment(s)
To read further discussion on this topic go here- LINK
Ok, I got some pictures and measurements. When comparing my NOS truck female lap belt with the NOS shoulder female belt, there is only a difference of 1 & 1/2". The female shoulder belt is a little longer (1&1/2"). Therefore, any truck lapbelt should be just fine to use for the shoulder belt. The female truck lapbelt measured (webbing only) tip to tip, 42". |
Re: NOS Black Shoulder Belt Set on Ebay...Not mine.
2 Attachment(s)
Ok, now for the male end. I measured my male shoulder belt (metal end to metal end), and it measured 28". So, a if using a car middle belt, it would have to be between 25-32 (metal tip to metal tip) inches to work. However, if piecing these together, all you need is the correct flat ends and any male belt that has webbing that exceeds 32 inches, and then have a shop sew on the correct flat pillar end. The waved/ridged car end will work...and you could even flatten it in a press or heavy duty vice.
Or, you could take the floor mounting end from a Female doner truck lap belt, and make the needed cuts and make one exactly like the flat truck male shoulder belt. |
Re: NOS Black Shoulder Belt Set on Ebay...Not mine.
Quote:
|
Re: NOS Black Shoulder Belt Set on Ebay...Not mine.
Quote:
http://www.truckandcarshop.com/truck...og/t60_025.gif |
All times are GMT -4. The time now is 02:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com