The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Pre 1947 Chevrolet & GMC Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=208)
-   -   OH 46 GM 4 speed -- new bearings and seals (https://67-72chevytrucks.com/vboard/showthread.php?t=812027)

dennislbrooks 09-16-2020 11:20 AM

46 GM 4 speed -- new bearings and seals
 
1 Attachment(s)
This 46 GM truck 4 speed is near free -- $50.

Wrenchbender Ret 01-09-2021 05:43 PM

Re: 46 GM 4 speed -- new bearings and seals
 
I'll take it. I sent a PM.
George

dennislbrooks 01-10-2021 04:33 AM

Re: 46 GM 4 speed -- new bearings and seals
 
How will you ever get it?

Wrenchbender Ret 01-10-2021 05:36 PM

Re: 46 GM 4 speed -- new bearings and seals
 
Yes. It would be a long way. My partner found one locally though. Thanks for the reply.
George

LILREDGMC 04-12-2021 12:26 PM

Re: 46 GM 4 speed -- new bearings and seals
 
Dennis:

Got a minute for an educational lesson. What's the difference between the three speed trans and this four speed for the 46 model? Is this the same back through 41? Any other info appreciated.
I have a 42 with the three speed, just thinking... Thanks again.

LILREDGMC

dennislbrooks 04-12-2021 08:48 PM

Re: 46 GM 4 speed -- new bearings and seals
 
Your 3 speed is syncroed in 2nd and 3rd. The 41-46 4 speed has no syncros at all. Starting in 47-67 the SM420 4 speed was used and is syncroed 2,3,and 4. There are threads on here for using it pre 47. You have some newer choices also like a T% out of an s10.


All times are GMT -4. The time now is 10:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com