Rear cab mount after frame shortened
1 Attachment(s)
So I started with a 1968 C20 long bed. I cut the frame to make it a short bed, when I was looking on here to see where the rear cab mounts boltto the frame, I noticed that all the articles on here have the mount where it sits up above the top of the frame rail. So my problem is that before I cut the rear mounts off they sit down below the frame about an inch which you can see in the picture. My question is do I put the rear mount at the same height it was when I took it off or do I need to raise it up? Thanks for any information.
|
All times are GMT -4. The time now is 11:35 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com