1950 Hudson Pacemaker
Yesterday I purchased a 1950 Hudson Pacemaker as a "retirement project" for the Grandson and I. I also in the process of buying my new lead sled project that Im going to be a Grandfather again. I guess I better get started so its done by the time they are old enough to drive LOL. Car is all original, flathead 6 with 3 on the tree. Nothing fancy, little to no chrome, radio delete. Unibody frame and floors are in really nice condition. Body is solid but riddled with dents. Taking my time on this one, going to see if we can get the flathead to turn over. I have it soaking in Marvels mystery oil and next weekend we are going to mess with it to determine if its worth trying to get it to run. Will keep you all posted on the progress
|
Re: 1950 Hudson Pacemaker
1 Attachment(s)
1950 Hudson Pacemaker
|
Re: 1950 Hudson Pacemaker
I like it ! Looks in pretty decent shape for it's age. What sort of condition is the interior? Pics of the interior would be nice to see. Must have a massive trunk I would think, LOL. Hope all the major parts and trim are still there, think it would a challenge if missing major components. Doubt there is a lot of after market support in parts. Good luck on the project.
|
Re: 1950 Hudson Pacemaker
Quote:
|
Re: 1950 Hudson Pacemaker
Looks like a good start. You should have loads of fun with the grandson.
My own boy now wants to learn to weld. So I am looking for gloves so he can try his hand at it. His 1/2 brother imitates me welding from a video I sent my son. I want a Packard with the same body shape to cut the top off of for a fair weather car, and shorten 18" roughly. |
Re: 1950 Hudson Pacemaker
Quote:
|
Re: 1950 Hudson Pacemaker
Dang that thing looks heavy..!!!!
|
Re: 1950 Hudson Pacemaker
1 Attachment(s)
Took some pics of the seats in the Hudson to post. Front is destroyed but the rear is in good shape.
|
Re: 1950 Hudson Pacemaker
3 Attachment(s)
Started to disassemble the front clip to get ready to pull the flathead / 3spd out
|
Re: 1950 Hudson Pacemaker
Quote:
|
Re: 1950 Hudson Pacemaker
Quote:
|
Re: 1950 Hudson Pacemaker
1 Attachment(s)
Front clip is removed
|
Re: 1950 Hudson Pacemaker
Make it much easier to pull the engine for sure. What transmission are you planning on using? Progress is always good to achieve.
|
Re: 1950 Hudson Pacemaker
Quote:
|
Re: 1950 Hudson Pacemaker
Neat car! I'd never heard of these before.
So do you think that's the original paint too? That was a neat color combo. |
Re: 1950 Hudson Pacemaker
I love it! :-)
|
Re: 1950 Hudson Pacemaker
1 Attachment(s)
Last weekend I finished removing the front clip and while trying to figure out if the flathead inline 6 is a 232 I discovered that the numbers on the block match the numbers on the serial plate inside the door. So it turns out i have a numbers matching 232 flathead inline 6 with a 3 spd manual/overdrive. This morning I removed the head from the motor and so far up top things look pretty good. To much fabrication to LS swap this unibody car so after discovering its numbers matching Im going to rebuild the flathead. That makes things pretty much plug and play. The paint is not original on the car, the original color is on the firewall but may be hard to see in the pics. Its a dark greenish blue color
|
Re: 1950 Hudson Pacemaker
Finding that the numbers match is a pleasant surprise. Can't go wrong with the 3 speed overdrive trans either. I love the one in my truck
|
Re: 1950 Hudson Pacemaker
Would be somewhat unique to see a build now days retaining the IL6 and 3OTT setup. Been a long time since I've driven a 3OTT. I like the idea of keeping the original driveline, it's different and rarely seen at a car show in today's world.
|
Re: 1950 Hudson Pacemaker
1 Attachment(s)
Here is the head. The MMO that I poured into each cylinder made the carbon bubble up like paint but it wiped right off the piston. I havent cleaned up the chambers in the head as of yet
|
Re: 1950 Hudson Pacemaker
1 Attachment(s)
I have been kicking around the idea of doing some lace paint on the car when i get to that point and was practicing on an old piece of body panel i had laying around. Color combo at this point im leaning towards a 2 tone black with the lace in metallic green
|
Re: 1950 Hudson Pacemaker
1 Attachment(s)
Today I removed the intake/exhaust manifolds, and the valve covers. The inside of the motor where the valve train is located is surprisingly clean. I removed the timing chain ( which is shot ) and the camshaft, lifters, and valves turn freely. The rotating assembly will turn 90 degrees in both directions before coming to a stop ( turning it at the flywheel with a screwdriver ) So for now I have come to the conclusion that it is possible the clutch is stuck to the flywheel and Im trying to turn both the crank and input shaft of the trans. Driveshaft is off and the trans is in neutral. After I get the motor and trans out of the car and split the unit I will investigate the problem further
|
Re: 1950 Hudson Pacemaker
2 Attachment(s)
Over the weekend I pulled the flathead and trans out of the Hudson. Once out of the car and on the floor I was able to get the bottom end of the motor to turn over 360 so motor wise I feel I am in good shape so far. Disassembled the front suspension as well to clean the components and frame to get ready to paint. Lowering the front 2 inches and converting from drums to disc over the winter as well as doing the wiring to get it out of the way first.
|
Re: 1950 Hudson Pacemaker
Quote:
|
Re: 1950 Hudson Pacemaker
Quote:
|
All times are GMT -4. The time now is 01:11 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com