Door Window Sweeps install
I am replacing the door window sweeps on my '68. They are gone so I have no reference to see how they mount. I see the metal slots cut in door panel. The new sweeps have hooks that obviously go into the slots. My question is do the hooks just latch in or do you have to bend them somehow?
Thanks for any help |
Re: Door Window Sweeps install
No bending required. Just slide em in. Spring pressure keeps em there.
|
Re: Door Window Sweeps install
Quote:
Ask me how I know this LOL |
Re: Door Window Sweeps install
Quote:
|
Re: Door Window Sweeps install
Quote:
|
Re: Door Window Sweeps install
Quote:
|
Re: Door Window Sweeps install
When pushing try only pushing just above the clips, less chance of bending. Kind of need to work it all at the same time. If you clip a couple of the clips all the way in it wants to bend to get the next clip started. Watch the video and take your time. I have ruined an NOS set trying to rush it.
|
Re: Door Window Sweeps install
Thanks Thealien
|
Re: Door Window Sweeps install
The overall length of my window sweeps was too long, so I had to trim them slightly to get them to fit. Modify the length, if needed, before you install.
|
All times are GMT -4. The time now is 12:14 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com