NO-E street build
Well i have been shopping for a while and want to build a NO-E street truck ( 7.49 and slower ) I was doing the LUV search on C list and happened across this thing way down the list . I called the number and left a messae . Took about a week and i got a call . Didnt even remember the truck thinking it was a dead end . Ended up talking to the owner Russel . he bought the truck almost 3 years before with intentions of doing a V-8 conversion and life got in the way and it got stored at a friends place were out of site out of mind became the norm. I ended up getting everything arranged and made the trek 3.6 hrs away to an area outside of a small town inTexas called Lott . A good friend of mine Rodger rode with me and we Meet Russell , delbert& chris . The truck had been sitting for quit a while and both front tires were flat . I looked over the current condition and evaluated the important corrosion spots . Seemed like a good canidate . So we struck a deal , loaded it up and brought it back to Baytown . Here are the only picks i have now .
http://i47.photobucket.com/albums/f1...023_150440.jpg http://i47.photobucket.com/albums/f1...023_160803.jpg |
Re: NO-E street build
I have often thought about doing a Luv. I wonder what one would run with my current combo.
Posted via Mobile Device |
Re: NO-E street build
Your combo would run good in anything
Wow , what a mess . Apartently they were hualing feed when it quit running and left a bag of bird feed in the passenger side .. On the flip side The tin is so clean that the carpet retainers are still in the truck . Here are some better pics from before the clean up started . http://i47.photobucket.com/albums/f1...chopics153.jpg http://i47.photobucket.com/albums/f1...chopics142.jpg http://i47.photobucket.com/albums/f1...chopics143.jpg http://i47.photobucket.com/albums/f1...chopics144.jpg http://i47.photobucket.com/albums/f1...chopics145.jpg http://i47.photobucket.com/albums/f1...chopics146.jpg http://i47.photobucket.com/albums/f1...chopics147.jpg http://i47.photobucket.com/albums/f1...chopics149.jpg http://i47.photobucket.com/albums/f1...chopics150.jpg http://i47.photobucket.com/albums/f1...chopics152.jpg |
Re: NO-E street build
Got alot done yesterday . Got the old carpet out and the seat cleaned up . Vacuumed out the inside and the floor pans are spotless . If my Yellow truck is a 6 rust wise , this truck has to be a 9 . I have yet to find rust through , just surface stuff i am fixing as i go . I also got it washed . This was a job . I first scrubbed it with some purple power then regular car wash . Rotory buffed it with Meguiers #1 polish . It came out prett good . Next will be a orbital with a Cleaner wax . The main water line to the house broke and the rear Ujoint on my big Ford quit on the way home from the hardware store . Busy evening , not to mention the wife is not as thrilled about this project like i am .
|
Re: NO-E street build
Got the Ford fixed and bought a LT4 Hotcam For the motor . The motor is a 96' 880 Vortec 2 bolt main with a nice set of polished and beamed older style rods and SRP 2 relief flattops . The bottom end hardware is ARP .
http://i47.photobucket.com/albums/f1...118_184632.jpg This motor was gapped at .018 top and .022 middle so it will need some run time before a small plate gets put on it . The Lt4 hot cam hydraulic roller lifters , double roller chain and 1.6 roller rockers all linked to a set of smaller World products Torquer S/R 180 heads , Summit stage 2 mid rise dual plane , a demon 750 ( may swap to 650 ) and a MSD Hei . http://i47.photobucket.com/albums/f1...118_183249.jpg http://i47.photobucket.com/albums/f1...118_183238.jpg My tight TSI Nitrous conveter out of my Yellow truck and the fresh TH350 that was originally in the yellow truck . http://transmission-specialties.com/...xhd_medium.gif 31 spline 9 inch woith 3.60 street gear and a spool . The rear axle will be narrowed to fit 15 x 10 with 5.5 backspace so all my wheels will fit both trucks . This truck will be on slapper bars , but i am working with Smith Racecraft out of Dallas on a set of these bars for it on stock springs . http://srdparts.com/index.php?page=s...emart&Itemid=1 |
Re: NO-E street build
Well got some done today . Woke up saturday and the wife and i drove up to Conroe , Texas . This is north of Houston and the largest fall swap meet we have . Found nothing fo a LUV . I did find a MSD billet HEI distributer with 8.8 wires and a nive like new play back tach . While at the swap meet i got a call and ended up headed back to work from the afternnon til 7 am in the morning . Got a little done on this thing . Swapped out the front side marker lights that had been spliced into for some spares i had stashed in the garage . I also dug around and found a passenger side mirror that wasnt broken . I replaced the master cylinder and blew threw the steel lines . New flex hoses , calipers , pads , seals ,fabricates 5 lug hubs with trooper rotors everything cleaned and bearings repacked with Royal purple wheel bearing grease . Here are the photos .
before: http://i47.photobucket.com/albums/f1...104_153913.jpg after: http://i47.photobucket.com/albums/f1...104_172245.jpg The healing has began: http://i47.photobucket.com/albums/f1...104_172709.jpg |
Re: NO-E street build
Just some clean up pics .
Before flor pans : http://i47.photobucket.com/albums/f1...106_184923.jpg After: http://i47.photobucket.com/albums/f1...106_184900.jpg Engine compartment http://i47.photobucket.com/albums/f1...106_201006.jpg http://i47.photobucket.com/albums/f1...106_200953.jpg |
Re: NO-E street build
Got more done this weekend . Cam swapped in the motor . Ended up going LT4 hotcam . Motor is just about finished .
http://i47.photobucket.com/albums/f1...112_152629.jpg Also picked up the rear axle . 85 Ford F-150 4 x 4 gave this one up for $150 . I have 3.60 with a spool , 4.20 spool and the 3.50 that came in this one . I cleaned up the backing plates and added new wheel cylinders , spring kits and shoes followed by turning the drums . All the front brakes are now new , except for the tubing . This includes rotors , bearing , calipers , seals , hoses, master cylinder , dot 3/4 synthetic fluid . http://i47.photobucket.com/albums/f1...112_115307.jpg And a sneak peak at how things are shaping up . http://i47.photobucket.com/albums/f1...112_115257.jpg |
Re: NO-E street build
Dis assembled the 9 inch today washed it out and bought new ends . Ordered new Strange axles and dropped housing off at the race car shop to be narrowed . New strange ends were also purchased . Gear is already set up with a spool and 3.60 gear . Rebuilt truck drums will be on the ends .
|
Re: NO-E street build
More cleaning . The broken air shockes were removed and the new/old ones from the Yellow truck were installed . All the poly tubing from air shocks removed . The rear section of the wiring harness was a mess . These trucks have the seperate turn signal brake light and require a converter box for trailer lights . Looked like there was 15 splices back there . I had the tail light harness off a 78' a buddy of mine parted out that was a Texas A&M campus maintience truck ( wornout ) . It was prefect so in it went . Both the side marker lights in the rear were not working due to broken wires . Had replacements as everytime i find one of these trucks i buy the lenses . Actually got the wiring cleaned up and working . Thinking the 4 cylinder might run . I found a good home for the motor here in Houston/Tomball . A father son restoration of a stock 1978 with a automatic . They are on Luvtruck.com and the parts will be helping there project .
Ordered a new oil pan , valve covers , breathers , air cleaner , roller rockers . This should be the last of the big stuff pending the radiator . |
Re: NO-E street build
You have been hard at it! It should be a fun little truck.
|
Re: NO-E street build
Quote:
|
Re: NO-E street build
Looking good.. Will be fun once in action!
Posted via Mobile Device |
Re: NO-E street build
wow brings back a lot of memories... my brother had a white luv with a 350 and auto trans... pretty much stock with all bolt ons when I was 15 (1985)... he would run mid 12's all the time and won a few trophys at the high school drags..... I all ways wanted it but never got it cause he wrapped it around a pole... survived no injuries but the truck was toast
|
Re: NO-E street build
Got a little more done on the drivetrain this week . Rocker arms are on and valves adjusted . The oil pan was from a caprice or roadmaster with the sensor in the pan and i couldnt get it to stop leaking . i replaced it with a new truck pan . i am waiting on the valve covers and breathers to come in and it should be close .
http://i47.photobucket.com/albums/f1...122_121241.jpg Also got the housing narrowed and the axles came in . The bearings are not correct , so i will have to wait for them to come in or buy them local . The axles should have come assembled and ready to install . I dont have a press so i have no idea what im going to do there . I double flaired the factory brake line with a standard 3/16 end to allow the use of an F150 brake flex hose . http://i47.photobucket.com/albums/f1...122_121203.jpg http://i47.photobucket.com/albums/f1...122_121213.jpg |
Re: NO-E street build
|
Re: NO-E street build
|
Re: NO-E street build
^ That'll do, pig. ;)
|
Re: NO-E street build
Not very romantic , but all the lights and signals now work except passengerside rear side marker . The wires are off it . I will solder it back up and re install it . The left turn signal indicator in the dash is bad so i will get it fixed , Got the horns working . Stock motor is locked up solid . More clean up and 1/0 battary cables built .
|
Re: NO-E street build
Got a bit farther along . The motor mounts were used and cut out of another truck . A budy of mines son Shawn is in metal shop class and he used the motor mounts as a project in metal shop . I got the hood off and more wiring done . All the lights are burning now . most of the stock motor is disconnected and ready to be pulled . Wife had me doing yard work most of the weekend , so no huge steps , but it iscoming along . Stock motor which is locked up about to come out .
http://i47.photobucket.com/albums/f1...202_180208.jpg http://i47.photobucket.com/albums/f1...202_180201.jpg All the key player having a meeting before moving in . http://i47.photobucket.com/albums/f1...202_180146.jpg |
Re: NO-E street build
Havent had alot of time for this truck lately but got a few things done . My Vortec block had no provisions for a fuel pump at all . No fuel pump rod hole or pump mount holes at all . I drilled and tapped the block for the fuel pump block off plate . The A/C bracket im going to use mounts to the fuel pump boss and the 2 holes in the front of the motor . Also the motor mounts will be the polyurethanes off my Yellow truck . Getting closer to the install .
http://i47.photobucket.com/albums/f1...210_180638.jpg |
Re: NO-E street build
Got a bit farther today . The Chevy Luv/Izusu rear axle is basically a Japanese copy of a Ford nine inch chunked in the oven and shrunk . I pulled the old assembly out and set the new axle on the moroso spring perches , with 1/2 " u-bolts and the Afco lower shock mounts that came on the Yellow truck . The emergency brake cables from the Luv snap right in the big Ford backing plates and the cables slide right in the cam arms for the e-brake of the drum brakes . Ill get some pics of the brakes coming up , but a photo update . 28 x10.5 x 15 slicks
http://i47.photobucket.com/albums/f1...218_184354.jpg http://i47.photobucket.com/albums/f1...218_184410.jpg http://i47.photobucket.com/albums/f1...218_184431.jpg 275 60 15 drag radial http://i47.photobucket.com/albums/f1...218_184509.jpg http://i47.photobucket.com/albums/f1...218_184459.jpg http://i47.photobucket.com/albums/f1...218_184442.jpg |
Re: NO-E street build
You can also see that after being cleaned up and buffed out that it has it's fair share of body damage . Most of the damage was hide when it was dirty .
|
Re: NO-E street build
Dash cap and radiator came in today along with the carpet and door panel material . The material is a 70's/80's mopar pattern that caught my eye 95% of people will never know it is not factory , the other 5% wont care .
http://i47.photobucket.com/albums/f1...219_203647.jpg http://i47.photobucket.com/albums/f1...219_203647.jpg Here are the original door panels . The kick panels will also be upolstered to match . http://i47.photobucket.com/albums/f1...219_203715.jpg Waiting on the A/C and alternator brackets to come in . Still need a fan , mufflers , sump for factory tank , Have been working 7 days a week and not had time for this , plus santa claus is coming and my girls are back in town for a while . |
Re: NO-E street build
I like this truck
|
All times are GMT -4. The time now is 11:08 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com