Re: My 1970 GMC Project
That garage looks familiar. Maby if all the paint pails weren't in the way of that driver side door he would drive that truck more.
|
Re: My 1970 GMC Project
Quote:
Quote:
|
Re: My 1970 GMC Project
Hey Kyle- I hope your making all kinds of progress and taking a ton of pictures...;) I could use some inspiration to get me back on my project!
|
Re: My 1970 GMC Project
1 Attachment(s)
Haha I am making progress for sure, unfortunately though it is not on the truck. I've been very busy with renovations on the house. We needed a new deck as well as new flooring and paint. With any sort of luck, I might be able to jump back on the truck sometime in June.
|
Re: My 1970 GMC Project
Looks like you are in the same boat as I am! The thing that bothers me is, since I'm not the most organized guy, every time I get a half of an afternoon to work on my truck, it takes me a solid hour of thinking to get me back on track and figure out what I need to do next. I admire guys who can juggle a hundred things and still be organized.
I'm still neck deep in a kitchen and bathroom remodel. We have guests coming to stay with us this Thursday for a week to 10 days so the push is on to wrap up the loose ends and get everything back in its place. Your deck looks sweet by the way. |
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
1 Attachment(s)
Woo hoo! Progress. I am out in the shop today for the first time in over a month! Working on grinding down my wire gutter filler panel. By no means a quick procedure but its good to be back at it for a bit!:metal:
|
Re: My 1970 GMC Project
Good deal man, I'm ready to see the firewall completed! :D
|
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
1 Attachment(s)
Man this takes time! But I'm very happy with the results.:metal:
|
Re: My 1970 GMC Project
what are you putting on the bare metal to keep it from rusting while you work on it? Being up north, I know your spraying something on there :D
I use a product called "dry coat", works for a year it says. I sprayed it on my hood almost 1.5 years ago and it's still holding. . |
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
That looks nice. Primer will be sweet. I hear wd40 will help keep bare metal clean from flash rust. Never tried it.
|
Re: My 1970 GMC Project
Wow
|
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
2 Attachment(s)
Well its official, I am converting to 5 lug. I found the last rally rim I needed to complete my set. They are still 15x8 so I'm not loosing any width on the tires.:metal: I also forgot to post pics of my score from that junker that gave me a square body front cross member. Other than that, I am still just grinding away. :waah: :lol:
|
Re: My 1970 GMC Project
1 Attachment(s)
........still grinding:waah: Not to sure when ill be able to hit this thing next but hopfully it won't be as long as last time. I'm off to the lake tomorrow morning. Have a good one guys.
|
Re: My 1970 GMC Project
Looking good. What are you using for a grinder and what grit? Metal looks real good.
|
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
I was really wondering how much work it would be to open up that inner cowell and clean it out/paint it. Not really sure the difficulty either.
Ive also been contemplating that drip edge... Im trying to finish my truck some time before I die and am hesitant to add anything to the 'list'.... lol |
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
4 Attachment(s)
Well that was a productive evening. I finished grinding down that last bit of weld, then I dismantled all the front sheet metal off the truck and got the passenger fender all mocked up. Fits pretty good but the cowl is a mile off. Haha now the fun begins. That last pic.......:lol:
|
Re: My 1970 GMC Project
I bought some primer for my firewall today. I really wish I had a vintage air unit so that I could fab up my mount before hand as that is the only thing that I can think of that might need to be welded to the inner firewall. Other than that I'm almost ready for priming it. I might have to redo the first patch I did though. I guess if I weld to the inner firewall later and it burns off the primer in a few spot it won't be that big of a deal.
|
Re: My 1970 GMC Project
This should be interesting, there was almost 3/8" of bondo on some of this damage yet it was still clearly damaged....like they were trying to pull the "it ain't that bad" thing.:lol: Re Creating that rolled lip at the edge of the wheel well could be a challenge but I'm up for it.:metal:
|
Re: My 1970 GMC Project
1 Attachment(s)
Forgot the pic
|
Re: My 1970 GMC Project
I think you can do this. Progress looks good!
|
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
1 Attachment(s)
Woo hoo! I did something exciting today guys! I got the firewall in primer!:metal: No more worry about flash rust. Now ill be back to the fender repair. I have a plan of attack for the rest of my rust repair too. Since I have the passenger A pillar and nor the driver one, I'm going to go ahead and get the passenger fender and cab rust repair done. Then I'll have to blow this front end apart so I have room to spin the thing around and get at the driver side.
|
Re: My 1970 GMC Project
Hey that looks good!
|
Re: My 1970 GMC Project
nice work man! looks super clean.
|
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
5 Attachment(s)
And so the rust repair continues. This morning I cut out the rot at the lower corner of my passenger fender. After that, I found that the inner structure had taken a fair amount of rust as well so I went ahead and cut that out as well. I made a new piece for the inner structure and got it welded in.
Between welding on that while waiting for it to cool, I also started working on the patch panel for my passenger B pillar. The thing, like all my other pieces, was not going to just drop right in and fit. So I went ahead and chopped it into three pieces so that I could get it right. Now I just have to weld it all back together and it can be installed. |
Re: My 1970 GMC Project
3 Attachment(s)
Wheew that was alot of welding to fill in that gap, but its done now. Done mind the ugly welding, I was fighting it all the way. I also managed to get my fender patch ground down tonight as well. Hopefully tomorrow I can find some time to grind down the b pillar patch and maybe even get it welded in.
|
Re: My 1970 GMC Project
4 Attachment(s)
I got my B pillar patch finished up. Then I proceeded to test fit it with the rocker panel. It fit quite well. My door gap was also nice. It can still be fine tuned a little bit when I install the cab corner. Not sure if I want to do the cab corner or rocker panel next? Is there a benefit to doing one before the other?
|
Re: My 1970 GMC Project
Great work
|
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
Lookin' great as usual Kyle.:metal:
|
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
3 Attachment(s)
Wow you would think that I would just realize by now that every piece I have for rust repair is terrible. I had a few minutes tonight to get an idea of how my cab corner is going to fit. It just looks terrible. :lol: I'm going to have to section it at least twice to get the fit right. Looks like I got my work cut out for me. These pictures are after I put the thing in a choke hold and folded it in quite a bit. Which created quite the kink on the lower edge of the corner.
|
All times are GMT -4. The time now is 11:21 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com