The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   My 1970 GMC “Project Splice” (https://67-72chevytrucks.com/vboard/showthread.php?t=751569)

Kronald_70GMC 02-11-2024 07:24 PM

Re: My 1970 GMC “Project Splice”
 
That would make sense. I also don't know much about them. Mine were completely seized and would only move with a hammer so I gave up on them :lol:

Kronald_70GMC 02-25-2024 12:04 AM

Re: My 1970 GMC “Project Splice”
 
2 Attachment(s)
Got some more sanding and filling done on the bottom lip of the dash. I was also able to nearly complete the repair in the passenger door pillar where I had filler flake out. Work on the truck has been slow as of late. I've had some side jobs and a plumbing disaster at home that has set me back a bit. Here's hoping for more consistent time on the truck. :lol:

Kronald_70GMC 03-24-2024 09:36 PM

Re: My 1970 GMC “Project Splice”
 
1 Attachment(s)
Some more filler happening with the dash and some of the weld seams in the firewall and the kick panels. I'm filling the firewall ones so I can be sure that they are sealed from both sides. It's been terribly slow lately. I've been working on some laundry cabinets that I am building for my wife's cousin and they are taking much more of my time up than I initially expected. I finally got them all built and painted so I can assemble and deliver them and have my Sundays back for truck work. At least for a little while anyway ;):lol:

1972CheyenneSuper 03-24-2024 10:02 PM

Re: My 1970 GMC “Project Splice”
 
Looking good, progress is progress. Life has a way of throwing 100 things you don't want to do that get in the way of the one thing you enjoy doing.

Kronald_70GMC 03-24-2024 10:16 PM

Re: My 1970 GMC “Project Splice”
 
Quote:

Originally Posted by 1972CheyenneSuper (Post 9298465)
Looking good, progress is progress. Life has a way of throwing 100 things you don't want to do that get in the way of the one thing you enjoy doing.

Haha ain't that the truth!

Kronald_70GMC 04-13-2024 04:25 PM

Re: My 1970 GMC “Project Splice”
 
1 Attachment(s)
Well it seems in true fashion of "Life gets in the way", it is time for my project to have a bit of a pause. Today I loaded the truck up onto the trailer and filled it with as many parts as I could fit into it. It will be going into storage as we have decided to put our house up for sale to build a new one. I still have the new cab at home so I will still hopefully get some work in before we sell the house. On the plus side, the new house will have a much larger work space for me to finish the truck in.:metal:

Getter-Done 04-14-2024 10:14 PM

Re: My 1970 GMC “Project Splice”
 
This is Great News that you are Keeping on Keeping on. :metal:

I can Relate to this . :metal:;)

Kronald_70GMC 04-14-2024 10:33 PM

Re: My 1970 GMC “Project Splice”
 
Quote:

Originally Posted by Getter-Done (Post 9304552)
This is Great News that you are Keeping on Keeping on. :metal:

I can Relate to this . :metal:;)

Thank you. I was actually working a little bit on the cab for the first time in about a month this afternoon. Still picking away at filler so I didn't bother posting about it since I feel it must be getting boring to look at. I plan to post something on here from time to time even if it's just some progress pictures of the house. We still have some time before that happens though. The build will only be starting next spring and we plan to have the current house till maybe August or something.

Scurry67 04-15-2024 12:02 AM

Re: My 1970 GMC “Project Splice”
 
More space will definitely be nice! Keep chipping away!

Kronald_70GMC 04-15-2024 02:38 PM

Re: My 1970 GMC “Project Splice”
 
Quote:

Originally Posted by Scurry67 (Post 9304583)
More space will definitely be nice! Keep chipping away!

It will be very nice. I will have a 14' x 36' Shop space that will be setup for a drive through into the backyard and if needed I can overflow into my parking space for another 12' x 24' :metal:

Kronald_70GMC 04-15-2024 11:33 PM

Re: My 1970 GMC “Project Splice”
 
5 Attachment(s)
Well that was the most productive night I've had in a long time on the truck, even though it was 2 steps forward, one step back.:waah: I found that I had missed an "oil can" on the firewall which was causing me issues with my filler so I decided to melt off the filler and primer I had already applied so I could heat shrink the affected area. I only wish I remembered to take a before picture. :dum: Oh well. Haha before I did the heat shrink, I had a 1/4" gap in the middle between the straight edge and the firewall. Much better now! :metal: I was also able to get some more sanding on the kick panels done which brings me very close to being done with marglass inside the cab. Good thing too because I'm about out of the stuff.:lol:

Kronald_70GMC 04-22-2024 10:54 PM

Re: My 1970 GMC “Project Splice”
 
1 Attachment(s)
Little bit more filler completed tonight. I think I'm done with marglass inside the cab now.

raggedjim 04-23-2024 09:44 AM

Re: My 1970 GMC “Project Splice”
 
You are hanging with it! I'm sick and tired of bondo and sanding and I'm just trying to get my bed floor straight!

The drive thru garage will be a big bonus, I try to do most of my sanding and grinding outside but it doesn't always work out that way. My shop is a mess...

Kronald_70GMC 04-23-2024 02:05 PM

Re: My 1970 GMC “Project Splice”
 
Quote:

Originally Posted by raggedjim (Post 9307632)
You are hanging with it! I'm sick and tired of bondo and sanding and I'm just trying to get my bed floor straight!

The drive thru garage will be a big bonus, I try to do most of my sanding and grinding outside but it doesn't always work out that way. My shop is a mess...

Thank you! I agree, having the option to roll outside to sand would be awesome. I look forward to it. As for the sanding I'm doing now, I think the worst of it is having to lay across the cab floor and try to sand. These floors aren't particularly comfortable with all the bumps and such. :lol:

Kronald_70GMC 05-05-2024 07:13 PM

Re: My 1970 GMC “Project Splice”
 
1 Attachment(s)
Got a little bit of sanding done today. I have a few low spots on the passenger kick panel so that should only need one more coat.

ryans69chevy 06-05-2024 07:00 PM

Re: My 1970 GMC “Project Splice”
 
Been awhile since I posted on your build. It's looking good so far. A new/bigger shop to work in is gonna be nice. Have the builder put in tall side walls for when you add that lift for your oil changes. Tell the wife you can sell your creeper :)

Kronald_70GMC 06-06-2024 12:13 AM

Re: My 1970 GMC “Project Splice”
 
Quote:

Originally Posted by ryans69chevy (Post 9316984)
Been awhile since I posted on your build. It's looking good so far. A new/bigger shop to work in is gonna be nice. Have the builder put in tall side walls for when you add that lift for your oil changes. Tell the wife you can sell your creeper :)

Thanks! Haha I think I'll be right about 12' walls in there. Should be enough should I go that route some day.

clay68c10 06-08-2024 06:21 PM

Re: My 1970 GMC “Project Splice”
 
The truck is looking great!

Yes you 100% want a lift. Any time I have to do maintenance on my cars I take them to work and use the lift. It will spoil you but is a great investment.

Kronald_70GMC 06-09-2024 12:02 PM

Re: My 1970 GMC “Project Splice”
 
Quote:

Originally Posted by clay68c10 (Post 9317741)
The truck is looking great!

Yes you 100% want a lift. Any time I have to do maintenance on my cars I take them to work and use the lift. It will spoil you but is a great investment.

Thanks. I do hope to have one some day.

Kronald_70GMC 07-26-2024 12:39 AM

Re: My 1970 GMC “Project Splice”
 
1 Attachment(s)
I feel like its been forever since I've done anything on the truck. I also feel like it's been far to long with no post here. Unfortunately I don't really have any progress to report other than the truck nested away in the back of the sea can. I realise it was probably not smart to put a foosball table on the hood but I didn't have room for it anywhere else. The hood already needs some work so I'm sure it won't be the end of the world.

Kronald_70GMC 08-25-2024 07:50 PM

Re: My 1970 GMC “Project Splice”
 
5 Attachment(s)
And with that, it is official. No work will be happening on the truck now until I can get it into the new garage. I'm guessing it will be about 2 years at least before it gets there. It is going to suck not being able to do anything for that long but it is going to be so nice to have the new shop. All I can do now is hope and pray that I don't end up with a bunch of surface rust on all the bare metal areas of the cab. It's been sitting in my garage for years with bare metal and I have hardly seen any surface rust so hopefully the sea can will be no different. Although my garage was heated and the sea can is not.....

Still needing to finish up some things around the house and finish moving the rest of our stuff out before we sell. I'll try not to be too much of a stranger around here. Thanks everyone for following along this far. :metal:

Getter-Done 08-25-2024 09:18 PM

Re: My 1970 GMC “Project Splice”
 
1 Attachment(s)
Sometimes stuff like this happens.

I know to well.;)

About that Bare metal this stuff works great in the link below.

It's a little over $9 dollars acan but it works.

Link: https://www.amazon.com/STA-BIL-Heavy...01N4TC0NU?th=1

Attachment 2387712

Kronald_70GMC 08-25-2024 10:14 PM

Re: My 1970 GMC “Project Splice”
 
Quote:

Originally Posted by Getter-Done (Post 9336344)
Sometimes stuff like this happens.

I know to well.;)

About that Bare metal this stuff works great in the link below.

It's a little over $9 dollars acan but it works.

Link: https://www.amazon.com/STA-BIL-Heavy...01N4TC0NU?th=1

Attachment 2387712

I had thought about using a product like that but I'm not sure how that would work with the bodywork I've started. I feel like it could soak into the filler and cause me paint issues down the road. Maybe I'm just overthinking it. I have a habit of doing that 😂

Getter-Done 09-01-2024 08:56 PM

Re: My 1970 GMC “Project Splice”
 
Quote:

Originally Posted by Kronald_70GMC (Post 9336348)
I had thought about using a product like that but I'm not sure how that would work with the bodywork I've started. I feel like it could soak into the filler and cause me paint issues down the road. Maybe I'm just overthinking it. I have a habit of doing that 😂

Yeah

It's kind of the worse of 2 evils.

Rust or sand the filler later.

I have been in the same place just not to your extent.

I have a tenancy to overthink some stuff also;)

bnorth 09-03-2024 05:40 PM

Re: My 1970 GMC “Project Splice”
 
Sorry to see this back burnered but I do hope you have some decent ventilation in the sea-can as they can produce condensation inside like crazy as the temperatures swing and the seasons change.

Kronald_70GMC 09-03-2024 08:20 PM

Re: My 1970 GMC “Project Splice”
 
Quote:

Originally Posted by bnorth (Post 9338633)
Sorry to see this back burnered but I do hope you have some decent ventilation in the sea-can as they can produce condensation inside like crazy as the temperatures swing and the seasons change.

Yeah I'll be keeping a close eye on it. It has been out there for almost a year before we filled it up and I have been checking in on it every now and again and it always felt really dry in there. Here's hoping.

Kronald_70GMC 11-04-2024 11:32 PM

Re: My 1970 GMC “Project Splice”
 
2 Attachment(s)
The house is sold! We will breaking ground on the new one in the spring when the ground thaws. I am working on a rendering of the new house. The green shows up disgusting on here. I promise it won't be that gross when we build. :lol:

Getter-Done 11-10-2024 09:11 PM

Re: My 1970 GMC “Project Splice”
 
Good to hear this.

The House design looks great. :metal:

Kronald_70GMC 11-10-2024 10:51 PM

Re: My 1970 GMC “Project Splice”
 
Quote:

Originally Posted by Getter-Done (Post 9352653)
Good to hear this.

The House design looks great. :metal:

Thanks! I finally get to have a bit of a breather after moving and getting the house ready to sell for the last 2-3 months.


All times are GMT -4. The time now is 02:50 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com