The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Racing and high performance (trucks haulin more than hay) (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=60)

- - Header help (https://67-72chevytrucks.com/vboard/showthread.php?t=788644)

CANUCIT

06-15-2019 06:07 PM

Header help

1 Attachment(s)

I have a 62 short fleet that I have backhalfed and I just installed a dart 540 and I have found that the headers I have will not fit
They are super comp full length headers
2 inch with a 3.5 inch collector
Hok-2213HKR
Any suggestions?
Do I need shorties or maybe a 1 7/8 headers
Or maybe a different brand of headers
These hit the sides and...the lower control arm
Thx in advance

hjewell2

06-15-2019 07:16 PM

Re: Header help

subd----- I need help with mine also, headers are getting old and thin looking for a new pair with a good fit .

Ironangel

06-26-2019 06:46 AM

Re: Header help

Quote:

Originally Posted by CANUCIT (Post 8542884)

Have you tried calling these guys? https://www.hedman.com/C10-Truck-Headers

68 C-10 KID

06-29-2019 08:56 PM

Re: Header help

I think mad dog headers might make a few sets that might work.

CANUCIT

06-30-2019 09:34 AM

Re: Header help

Hedman elites semi fit with alot of massaging (aka) beating the hell out of them, but I did have to put plates under the motor mounts because the passenger header was hitting the lower a arm
And that's because I moved the mounts 1 inch forward
Always something

All times are GMT -4. The time now is 10:18 AM.