The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Detailing (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=65)
-   -   Alum. wheel cleaner? (https://67-72chevytrucks.com/vboard/showthread.php?t=618573)

Kudzupatch 02-28-2014 02:38 PM

Alum. wheel cleaner?
 
I have tried 2 or 3 commercial wheel cleaners and they clean the brake dust, don't bother the paint but they seem to etch the machined aluminum, leaving it looking bad. I have spend a good bit of time polishing to get them looking good again and this is just a pet peeve of mine.

So, what do you recommend to clean them with?

And, should I look at clear coating them next time I clean them? If so any recommendations as what to spray them with?

https://scontent-b-atl.xx.fbcdn.net/...18367204_n.jpg

1970/327/c10 03-01-2014 09:52 PM

Re: Alum. wheel cleaner?
 
I use Mothers aluminum wheels cleaner. It comes in a spray bottle. Then I use either Blue Magic or Mothers aluminum polish with Mothers power ball. Living down a gravel road, doing it that way just about makes them look brand new.

Iceburgh 03-06-2014 04:23 PM

Re: Alum. wheel cleaner?
 
Not much out there for cleaners that you just spray on and walk away for aluminum. All will need a soft brush or sponge.
As far as a polish nothing better on the market IMO then Bush's


All times are GMT -4. The time now is 01:00 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com