Project “Blue Bomb” (rebirth of a 1970 c30)
5 Attachment(s)
I'd been on the hunt for an original c30 for a while. Finally found a really great one, mostly unmodified and well preserved. I had to make quite a drive to get it, but I'm happy I did. I plan on keeping this a work truck, just with a bit of new styling. It will keep all the manly 1-ton features (roof lights, big honkin mirrors, stick shift), but it will look a bit different than how it started.
The truck was originally fitted with a big cabover camper. So the cab was very well protected over the years from rain and sun. The camper unfortunately was damaged beyond repair so I had it removed. Here is how it looked when I found it: Attachment 1818744 The whole interior is extremely nice, and I won't be changing it at all. The only damage is a few small holes in the top of the seat where the PO installed some snaps for the pass through, and a few small cracks in the steering wheel. I plan to disassemble and fully clean and detail the interior, but that’s about it. Attachment 1818745 Attachment 1818746 Here is the plan: - Replace the split ring wheels with a set of 19.5" p30 wheels I've been saving (black with chrome caps) - Possibly drop the front end a smidge if it won't rub - Polish up the original oxidized paint - Trim up and paint the back half of the frame - Paint the front bumper black (it's a crappy white repaint otherwise I'd keep it as-is) - Replace the grandpa mirrors with stainless equivalents (or maybe have them re-chromed) - Pull behind receiver with a semi-truck style receiver/tail light section - “Maybe” paint on some door logos. Not really my thing, but I think it could be a nice touch - Not sure about a flatbed just yet, but it might happen Here's a quick and dirty before and after photo shop edit of what I have in mind: Attachment 1818747 Attachment 1818748 |
Re: Project “Double Tap” (rebirth of a 1970 c30)
looks like the start of a great project.
|
Re: Project “Double Tap” (rebirth of a 1970 c30)
NICE.
I have 2 c30 looking to jazz up .So I'll be watching. |
Re: Project “Double Tap” (rebirth of a 1970 c30)
2 Attachment(s)
Jazz up. I like it.
Well I got the frame cleaned up. Went through quite a few cutoff wheels, but it looks much better now. Attachment 1819143 Attachment 1819144 |
Re: Project “Double Tap” (rebirth of a 1970 c30)
2 Attachment(s)
Cleaned up a fender for a sneak preview of the original paint. This is my favorite part.
Attachment 1819253 Attachment 1819254 |
Re: Project “Double Tap” (rebirth of a 1970 c30)
You said you might make it a flatbed but not sure. If not a flatbed Im curious whats going to happen back there.
|
Re: Project “Double Tap” (rebirth of a 1970 c30)
Quote:
|
Re: Project “Double Tap” (rebirth of a 1970 c30)
Quote:
|
Re: Project “Double Tap” (rebirth of a 1970 c30)
In to watch this one.
|
Re: Project “Double Tap” (rebirth of a 1970 c30)
In to watch too.
|
Re: Project “Double Tap” (rebirth of a 1970 c30)
Nice truck! Your interior is mint! Can’t wait to see the finished product. Our trucks must be brothers! Starting a build thread for mine soon.
|
Re: Project “Double Tap” (rebirth of a 1970 c30)
5 Attachment(s)
Thanks guys. :)
I'm slowly working on hand buffing the paint. It's coming out pretty good, it's just a very slow and tedious job. There's a good amount of 48-year old duct tape around the back window that's a real pain. But overall the paint is coming to life really well. Here are a few minor updates (it's all about the little details). My son was in charge of the cab roof lights. No cracks and the bulbs all work! Attachment 1819676 Attachment 1819677 Attachment 1819678 I thought the hood emblem was done for, but I learned these have a plastic bowtie insert, which I painted to match the grille inserts and soon-to-be black bumper... Attachment 1819679 Attachment 1819680 |
Re: Project “Double Tap” (rebirth of a 1970 c30)
1 Attachment(s)
Quote:
|
Re: Project “Double Tap” (rebirth of a 1970 c30)
350. It has 4.57’s so I’m hoping that helps. Ironically I’m putting a built 396 in my 2wd shortbed. :)
|
Re: Project “Double Tap” (rebirth of a 1970 c30)
Truck looks great! I'd love to have a flat bed dually like this....don't really need one, just want one :cool:
|
Re: Project “Double Tap” (rebirth of a 1970 c30)
Quote:
|
Re: Project “Double Tap” (rebirth of a 1970 c30)
5 Attachment(s)
Time for a few updates. I took my 6-year old daughter for a ride around the block today. She LOVED it. She told me the truck should be called "Blue Bomb" so I'm seeing if I can change the thread name.
I focused mainly on the interior, but also the rear of the cab. Floor cleanup: It was pretty dirty, like most of these trucks. Attachment 1821246 The mat was in pretty good shape, just dirty and a few small tears. Attachment 1821247 After wash with a bristle brush and soapy water. Attachment 1821248 After air drying. Attachment 1821249 Rubbed in some trim restorer. I like this stuff because it dries "dry" (not slimy) and although it doesn't stay dark black for long it gives it a clean original look. Attachment 1821250 |
Re: Project “Double Tap” (rebirth of a 1970 c30)
2 Attachment(s)
The horn button was dirty and faded. After a good cleaning and a bit of that trim restorer, it's like new. All tabs intact.
Attachment 1821251 Attachment 1821252 |
Re: Project “Double Tap” (rebirth of a 1970 c30)
1 Attachment(s)
Forgot to take a before picture, but the seat belts cleaned up really nicely with soapy water and a bristle brush.
Attachment 1821253 |
Re: Project “Double Tap” (rebirth of a 1970 c30)
3 Attachment(s)
|
Re: Project “Double Tap” (rebirth of a 1970 c30)
5 Attachment(s)
Doors/panels, door jambs, rockers, dash, etc. Lots of elbow grease, but it's a very rewarding process with a truck in this condition.
Attachment 1821257 Attachment 1821258 Attachment 1821259 Attachment 1821260 Attachment 1821261 |
Re: Project “Double Tap” (rebirth of a 1970 c30)
2 Attachment(s)
The back window (inside and out) took some careful attention. 50-year old duct tape all over that was used to seal up a pass through into the camper. Glad to be done with it. All the glass (including windshield) is original soft-ray, except there was no rear glass. I got a lead on a soft-ray piece from a friend, so I'll be getting that installed soon...
Attachment 1821263 Attachment 1821264 |
Re: Project “Double Tap” (rebirth of a 1970 c30)
That came out really nice!
|
Re: Project “Double Tap” (rebirth of a 1970 c30)
Nice job!! Its really coming along :cool:
|
Re: Project “Double Tap” (rebirth of a 1970 c30)
Very cool. Mine has the notorious cutout for the walkthrough. Does a serious # on the reusability.
|
All times are GMT -4. The time now is 10:42 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com