Sm 465 speedometer plug
I have a 2wd sm465 in a modified pile. The transmission is easily seen at all times.
I am using GPS for the speedometer(live traffic updates, hazards, etc) and do not need the mechanical speedometer outlet. But I also don't want leaks. Does anyone make a billet or other "plug" that wont look cheap. I don't have a mechanical cable so would need to buy a new one and "cut it down" to serve as a plug. That is plan B. But I would perfer just screw on billet plug of sorts that would seal that transmission from leaking out of the old speedometer cable outlet. Anyone have any recommendations on a plug that will simply screw on? |
Re: Sm 465 speedometer plug
You don't need a plug. Fluid doesn't go into the cable. If it's leaking it needs o-rings.
|
Re: Sm 465 speedometer plug
Just install the speedometer cable driven gear and the driven gear carrier in the transmission.
|
Re: Sm 465 speedometer plug
[IMG]https://i.ibb.co/zXzSfkF/20220812-152233.jpg[/IMG]Best way to cover this?
https://ibb.co/48HjNQ2 https://ibb.co/48HjNQ2 |
Re: Sm 465 speedometer plug
There is no need to cover it.
|
All times are GMT -4. The time now is 02:00 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com