The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Slotted Rim ID? (https://67-72chevytrucks.com/vboard/showthread.php?t=811456)

Hewfil1 09-03-2020 03:12 AM

Slotted Rim ID?
 
4 Attachment(s)
So, I've seen a couple posts regarding these very wheels, but I just wanted to be sure as to what they are.
I believe they're American Racing wheels, but I have a set of these, two in what I'm assuming to be 15x7, but I'm not sure what the other wider two are size wise.
I've been wanting to get rid of them and I was trying to figure out exactly what they are so I could put up a more accurate listing, or decide if they're worth keeping.

BabyBlue 09-03-2020 06:36 AM

Re: Slotted Rim ID?
 
Look for stamping on the back of the wheels. There is typically a size back there at a minimum. If not then you'd have to measure bead to bead to get the size.

As far as manufacturer goes...could be American Racing or could be Ansen.

72LB 09-03-2020 09:16 AM

Re: Slotted Rim ID?
 
Ansens or American Racing would be my guess also but there were also some no name foreign made ones that aren't marked.

special-K 09-03-2020 09:45 PM

Re: Slotted Rim ID?
 
Those look like two different manufacturers between the two sizes. I see a few differences


All times are GMT -4. The time now is 07:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com