67 short fleet
2 Attachment(s)
I have owned this truck for about 16 years. I have been collecting parts for it since i bought it. I thought I was going to save a bunch of time and money and purchace a different cab. Well after blasting it, it is as just about the same as what I already had.
My current task is to get the cab done and then I will do the frame next. The truck will get a drop I think 4.5/6 range. More pictures to come soon. |
Re: 67 short fleet
so what's the plans?
|
Re: 67 short fleet
Quote:
|
Re: 67 short fleet
Looks like a great build, best of luck!
Just so you know... a c-notch will not be required for a 6" drop in the rear. If you have any questions about the install of the 4.5/6" drop kit, just let me know. I've posted the entire install in my build thread in my signature (Blank Slate). |
Re: 67 short fleet
looks like a nice truck to build it reminds my of my first truck (1972 chevy SWB fleetside).
|
Re: 67 short fleet
5 Attachment(s)
more pictures. The tailgate is a $20 rust free dented to hell swap meet buy. I still have alot of work to do on it. I may cut it accross the top and drill out the spot welds so I can straighten it easier. This is the (better) cab. It has been stripped and sand blasted and epoxy primed. The last picture I am marking to cut the outer floor extension out to get ready for a new one.
|
Re: 67 short fleet
Should be a great project. Note on the 700R4, I'm running a 400sbc with decent cam and 3.05 gears. The vehicle lugs on the highway (60-65) at 1300-1400 rpm. I think this due to the cam not being able to produce power at that rpm. I'll be puting in 3.73s to get it up to 1700 where it runns a hole lot better. Good luck
|
Re: 67 short fleet
5 Attachment(s)
more pictures
|
Re: 67 short fleet
5 Attachment(s)
more pictures.My son having some fun with my patina pump. I cleaned up the firewall a little. I also added a 72 throttle pedal.
|
Re: 67 short fleet
5 Attachment(s)
A pillar work being done.
|
Re: 67 short fleet
3 Attachment(s)
More patch panels. I found this bike while looking for truck parts at the junk yard. We have already had our $5 worth of fun with it.
|
Re: 67 short fleet
Subscribing to what looks like a really fun build!
|
Re: 67 short fleet
5 Attachment(s)
Long time with out progress. I've gotten back to it over christmas break. I installed the cab support and the inner a pillar/kick panel bottom. I got some firewall patches from a board member. Nice stuff!
|
Re: 67 short fleet
5 Attachment(s)
More pictures. I also got a drip rail from the same donor. The one on this cab got hit and it looks like it would be easier to replace than straighten. Firewall panel is removed and patch is close to the right size.
|
Re: 67 short fleet
nicw work that looks good
|
Re: 67 short fleet
Very nice work so far! Looks to be a nice build!
|
Re: 67 short fleet
4 Attachment(s)
I made some more progress today. The A pillar is almost done. I picked up this ebrake handle and cover for $5 this fall. It is a little early for a wiring harness, but I found this on craigslist. The price was right so I bought it. It looks like quality item.
|
Re: 67 short fleet
wow nice job i gonna need to get me a cover as well
|
Re: 67 short fleet
Nice progress Matt!
Also... do I see a new 'white' gas pump between the garage doors in one pic? Did you get rid of the patina pump? |
Re: 67 short fleet
Sweet look'n good
Posted via Mobile Device |
Re: 67 short fleet
3 Attachment(s)
Well I made some more progress. Firewall and floor patches are welded in. Just a few pin holes to fill. I cut out the rusty B pillar and have the patch close to fitting. What a PIA to fit all this stuff.
|
Re: 67 short fleet
your doing great and it amazes me that you only have one page!
|
Re: 67 short fleet
subscribed... keep up the great work!
|
Re: 67 short fleet
I really like the light Idea, you can never have enough light. The truck is really coming along and its great to see your replacing all that rust with new metal. Look forward to seeing more pictures.
JRBECK64 |
Re: 67 short fleet
i second jrbeck64
|
All times are GMT -4. The time now is 06:26 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com