![]() |
Need help identifying C30 rearend
1 Attachment(s)
Hey we are trying to get an 86 C30 flatbed ready for power tour and the "to do" list looks overwhelming. This truck was built from several trucks and I don't know what rear end was used in it. (It was originally a 4x2) Any help is appreciated!
|
Re: Need help identifying C30 rearend
Looks like a cab and chassis rear out of a one ton. The because of how close the break drum is to the spring.
|
Re: Need help identifying C30 rearend
Looks like a Cab and Chassis axle to me also.
If you have time take a Scotch Brite wheel. Clean the Axle Tube and look for the I. D. stamped Code. |
Re: Need help identifying C30 rearend
looks like the 14b under my C30 C&C
|
Re: Need help identifying C30 rearend
C & C dually rear--- 14b no doubt
|
Re: Need help identifying C30 rearend
I am wanting to convert it to a single driveshaft. Before I call some of the driveshaft builders, I wanted to know what brand the rear end is. When you say 14b does that mean it is a GM 14b?
Where is the ID code stamped? |
Re: Need help identifying C30 rearend
The ID code will be stamped on the axle tube.
I will try to go see if I can get a good picture of the one on mine. Here's a few links for info. Link: https://lugnut4x4.com/axles/14-bolt-...dentification/ Link: http://www.billavista.com/Tech/Artic...ble/index.html |
Re: Need help identifying C30 rearend
1 Attachment(s)
The code is on the top of the passenger side on mine.
Keep in mind that the ring could have been change over the years. Link: https://www.differentials.com/gm-axl...ication-codes/ Attachment 2344340 |
Re: Need help identifying C30 rearend
How long is your wheelbase?? If it's long, then to go to a 1pc shaft the diameter has to increase significantly...There's a reason for 2pc driveshafts...also nothing wrong with them
14b =14 bolt rear axle |
All times are GMT -4. The time now is 02:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com