Dana 44 axle or parts
 

Dana 44 axle from a 1976 K20. Hubs are sold already, has 4.09 gears. I am keeping the axle shafts and will sell the rest of the axle. Or parts off of it.
$75 for the whole axle minus the shafts- SOLD
$25 each for rotor/hubs-SOLD
$20 each for spindles-SOLD
$20 each for caliper mounts/dust shields-SOLD
$50 for the gears and carrier-SOLD
$25 each for knuckles-SOLD
All prices plus shipping, will not ship whole assembly, local pickup only in Iowa
Check or money order

Re: Dana 44 axle or parts
 

i'll take the spindles and caliper mounts/dust shields providing they are in good condition. shipping to a business address in brentwood, ca. 94513. thank you. P.M. me a total cost.

Re: Dana 44 axle or parts
 

Ok, give me a couple days to get it torn apart and I'll get you a total. Thanks

Re: Dana 44 axle or parts
 

no problem- the parts are for a project way down the road. take your time. :chevy:

Re: Dana 44 axle or parts
 

I pulled the hubs and spindles apart today. The dust shields around the spindles have rust holes. The spindles are good other than dimples from the previous owner pounding on them. Let me know if you're still interested.

Re: Dana 44 axle or parts
 

looking at them after you disassembled them I am going to to pass, sorry the rust is too bad and someone hammered the heck out of the spindles. really sorry for the inconvenience.

Re: Dana 44 axle or parts
 

no problem, I was surprised to see the marks on the spindles as well. I guess in our neck of the woods its good the dust shield are even still attached, usually those are long gone.
prices lowered for caliper brackets and spindles

Re: Dana 44 axle or parts
 

after thinking about it last night I might be able to chuck the spindles in my lathe and clean up the area behind the outer bearing. is it possible to put the nuts back on so the threads don't get damaged in shipping ? i'll take a chance on them, just P.M. me a total with your address and i'll get you a money order in the mail. i have a small hub front diff out of a 80 3/4 ton 4x4 that i can use the backing plates from, it's just i want the big hubs instead of the little ones like the 1/2 ton 4x4s use. i've built several sets of the big hubs with NOS parts and i figure i better use them on something before i get too damn old to play with my trucks anymore. thanks.

Re: Dana 44 axle or parts
 

Sure- I'll put the nuts back on, get a price and PM you with a total. The bearing surfaces look good and the spindles overall look good besides the area where they took the beating.
Thanks

Re: Dana 44 axle or parts
 

thank you, i'll get you paid as soon as you give me a total,:chevy:

Re: Dana 44 axle or parts
 

Eric, will send money order on my way to work in the morning. thank you.

Re: Dana 44 axle or parts
 

Eric, I haven't heard from you so I assume the money order hasn't showed up yet. I'll give it a couple more days and if it doesn't make it I'll see what i can do on my end, not sure if it can be cancelled or not, if it can I'll cancel it and get another one sent out. let me know if you see it by tuesday or not, thanks.

Re: Dana 44 axle or parts
 

I just got it today in the mail. Thanks

Re: Dana 44 axle or parts
 

I guess the carrier pigeon had a broken wing or something, pony express would have been faster :lol:

Re: Dana 44 axle or parts
 

Sent you a PM. I will take the brackets. Thanks.

Re: Dana 44 axle or parts
 

Eric,
spindles showed up today, thank you for packing them very well, the box looked like he!! but the spindles didn't get damaged.:chevy:

Re: Dana 44 axle or parts
 

Glad they made it, I was worried they would get beat up so I try to pack stuff like its going to the moon. I've noticed more stuff gets lost or smashed out west, but glad they made it. Thanks again

Re: Dana 44 axle or parts
 

Payment received today- brackets will ship today. Thanks again!