The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Buying a 79 what should I look for ? (https://67-72chevytrucks.com/vboard/showthread.php?t=3952)

69panele 01-05-2001 10:22 PM

Buying a 79 what should I look for ?
 
79 half ton burb, 454, auto,Scottsdale
Thanks

[This message has been edited by 69panel (edited 01-05-2001).]

Mike - 76 k20 01-06-2001 10:51 AM


Rust, rust, rust. Crawl under it and check the whole underbody. Here in TX I've seen some huge holes in old Burb backs.
I assume you're buying it to restore, not just a beater, so remember the interior is very expensive to repair but a paint job is cheap.
I'd ask some questions about the 454. Has the owner rebuilt it? If it's a 60 over 454 on its last legs, how much is it really worth?
If it's a manual tranny, just find out how old the clutch is - no biggie. You're on your own about an auto, I never mess with 'em.
I think I'd also check for driveshaft slack. With a 454, the shaft may be loose. If it's the ujoints and the owner doesn't know that, use that as a talk-down on the price. If it's the druveshaft, remember a new one will cost $250-$300. It's not fun to spit out a driveshaft.
-- Mike

69panele 01-07-2001 10:09 PM

thanks Mike


All times are GMT -4. The time now is 06:35 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com