Help finding part for C60 Tilt Cab
 

Ready to start on getting my Tilt Cab ready for the road! 366 with 5spd & 2sp axle. Has PTO for lift bed & everything works like new! Only has 70,000 miles on it, but has lots of brake problems. I am looking for someones help on locating wheel cylinders, brakes & master cylinder. My hope is to someday, make it into a rollback. I have a 20ft rollback bed to graph on to this, but will have to work on getting it lowered 1st. Any ideas on this would be appreciated also.
Thanks,
jim

Re: Help finding part for C60 Tilt Cab
 

Check with Napa, they usually can find parts on the older heavy duty trucks. Nice start digg the roll back idea.
Posted via Mobile Device

Re: Help finding part for C60 Tilt Cab
 

http://www.raybestos.com/wps/portal/...2NU5UUTIwNTA!#

Go under Medium Duty.

Should be able to the part numbers for virtually anything you need.

Hope this helps...

Re: Help finding part for C60 Tilt Cab
 

Thanks for the information............cant wait to get started.

Re: Help finding part for C60 Tilt Cab
 

Raybestos Chassis

http://www.raybestoschassis.com/wps/...2NU5UUTIwNTA!#

For suspension needs.

I am a former District Manager with this company.

Re: Help finding part for C60 Tilt Cab
 

If you can't find all you need in the above link, there is a guy over at Stovebolt.com who is real good in helping out on some of the parts that you have mentioned. If you go over there, click onto the Big Bolts forum.

As far as lowering your truck, I personally would just leave it like it is, but if I were to want it a little lower, I would just try Low Profile tires.

Bill

Re: Help finding part for C60 Tilt Cab
 

Nice heavy truck by the way. I'm almost surprised that it doesn't have Air Brakes.

Bill

Re: Help finding part for C60 Tilt Cab
 

PM sent, oldno7

Re: Help finding part for C60 Tilt Cab
 

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Re: Help finding part for C60 Tilt Cab
 

This is what I'm hoping to use for my rollback project

Re: Help finding part for C60 Tilt Cab
 

A tilt cab

Re: Help finding part for C60 Tilt Cab
 

I have had good success with Rock Auto online. They seem to have a better selection on the medium duty brakes. I have been very happy with everything I have ordered from them.

Link to my build thread including brake rebuild:

http://67-72chevytrucks.com/vboard/s...d.php?t=721374

Re: Help finding part for C60 Tilt Cab
 

This is hopefully going to be mine very soon

Re: Help finding part for C60 Tilt Cab
 

Hey Jim did you ever get the rollback on it

Help finding part for C60 Tilt Cab
 

I have had good success with RockAuto Parts online. They carry lots of medium duty stuff.