Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
1 Attachment(s)
Well I did it again guys. More splicing....:lol:. I think I might have to call this truck "Splice" soon. I hope all this splicing turns out alright in the end. Its starting to look a little ridiculous.
|
Re: My 1970 GMC Project
You might as well just cut the cab in half and extend it 4" for more room while you're at it. ;)
|
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
Metal work is looking great man. Are you waiting to have all the metal work done before spraying your primer?
|
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
1 Attachment(s)
Well its not alot of progress but I have one of the splices welded up and ground down. I dont have any play by play pictures, just the finished one. I mean it is probably a good thing, you guys must be sick of seeing the same thing over and over.;):lol: Also happy new year to all!
|
Re: My 1970 GMC Project
1 Attachment(s)
Some more welding down on the rocker repair. Im really starting to get a lot more confident in my welding skills.
|
Re: My 1970 GMC Project
1 Attachment(s)
Well it seems that every time I have a day set to get out into the shop, it just doesn't work out. So progress has been slow for sure but I promise there is a reason. Life is going to change come May so I have really been busy in the house getting the rest of the renovations done in the bedrooms. I went a little over the top painting in the baby's room but it turned out awesome! I have saturday set aside though so I can get back on track. If all goes to plan, the passenger rocker will finally be welded in by the end of the day.
|
Re: My 1970 GMC Project
1 Attachment(s)
Well I should have known by now. :lol: I was out in the shop most of the day but did not make it as far as I hoped due to another issue. I noticed that the floor just up from the inner rocker had a 1/4" bow when compared to the top lip of the rocker. I went back and forth on wether it would be a real problem or not and in the end I decided that I would be pretty choked if I had it all done and you could see a hump on the sill plate. So out came the grinder and another Splice was made. It seems that name is going to stick.;) So after all evening of welding and grinding, the inner rocker is ready to accept the outer!:metal:
|
Re: My 1970 GMC Project
Nice work on that room! And the c10 of course ;)
|
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
Nice work on everything!
|
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
2 Attachment(s)
Well would you look at that. I managed to sneak out in the shop last night and finish the prep on the rocker. I didn't like the way they made the front of the rocker with the lapped metal and large hole which is extremely in accessible so I cut that all up and welded it in nice and flush. The only thing left to do before I weld the rocker in is spray the weld through and hang the door for proper alignment. I plan to have it done tonight! :metal:
|
Re: My 1970 GMC Project
Awesome!
|
Re: My 1970 GMC Project
3 Attachment(s)
It is in!:metal:
|
Re: My 1970 GMC Project
Nice Work!!!
|
Re: My 1970 GMC Project
Quote:
Thanks for the kind words! I'm very stoked with how well it worked out even though it took alot of extra work to get there. |
Re: My 1970 GMC Project
Very nice work i would like to invite you over for a visit my truck needs some of that love too
|
Re: My 1970 GMC Project
Quote:
|
Re: My 1970 GMC Project
2 Attachment(s)
No progress on the truck to report but I have been cleaning my shop. I got myself a bolt bin which will be nice. Now I won't have to spend half my evenings looking for bolts and such. I also got a bunch of stuff off the floor by building a recycling/garbage center. That should greatly improve cleanup time in the future. I also found myself a computer monitor that I have hooked up as a small TV in there now. I am still doing a major deep clean at the moment so probably won't have any progress for another week or so but it sure feels good to have a clean shop.
|
Re: My 1970 GMC Project
2 Attachment(s)
Sometimes a break is the best thing:metal:
Flip for Ya.:gmc2: Attachment 2083482 Attachment 2083483 . |
Re: My 1970 GMC Project
Hey right on man! I wasn't aware that they can be flipped. No clue how though. I have my bolt bin all filled up now. Just about done with the deep clean. Just the toolbox left to sort out now.
|
Re: My 1970 GMC Project
3 Attachment(s)
Update on passenger side rocker. I ground down all my plug welds and the difficult to grind seam at the back edge tonight. I also started to weld the door seam the rest of the way. Couple more evenings on this side and I should be able to jump over and start the driver side rust repair.
|
All times are GMT -4. The time now is 02:50 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com