#1 truck in, good cab and other stuff
I got this home before it rained, 72 cheyenne super, has headliner holes and cargo light hole. Cab is pretty good will need rockers, corners and drivers front mount has 2 small holes in it, colw and floor pans look good, windshield is broke. Steering column, wiring, seat, all cab ac stuff goes with cab. $600
It has the 3 person seatbelts in $50 plus shipping. The bed is bad on pass side, but drivers side is pretty good, no rust, one dent-$150 for bed Rad. support is good, $50, no shipping Complete sway bar- $35 plus shipping rolling 5 lug chassis with tranny-$100 tailgate has no rust,but some dents and been cut on top-$40, no shipping |
hi
|
hiiiii!
|
inside
|
headliner and trim $75 plus shipping, one very small cut in headliner, a few small cracks in corners where screws tighten to much
|
cheyenne emblem $15 shipped
super emblem $15 shipped |
blazer + burb rear seat brackets, need cleaned and painted $50 plus shipping
|
oil fiiler tube $20 shipped
|
guages and bezel, chipping off in right top corner, $20 plus shipping
|
cheyenne super glove box door $40 plus shipping
|
ac compressor bad, all ac brackets $90 plus shipping
|
blue door panels, need cleaned pretty good shape, as you can the wood emblem on the aluminum, is peeled off some, with good original 72 arm rest but they need dyed. $80 plus shipping
|
arm rests go with door panels
|
I never realized that thoes part's were woth so much !
|
Which parts? What are you saying? Randy
|
a/c brackets
randy will u take 75.00 plus shipping for the brackets and hoses???
mark |
Teeitup,
Do you have ALL the brackets that hold the steering column to the cab? Inside and outside the cab. How much? $$. Thanks |
I have threw away alot of part that you are are selling I just feel Dumb Now. Seeing all of thoes parts and what they are worth.
Sorry if I pissed you off. |
Randy if you havent sent out the rear slider yet through in that brake pedal and e-brake pad and trim I can use that on the 72,and let me know what i owe ya!!!!!!!!
|
Randy,
If you still have the cheyenne glove box door how much would shipping be to Riverton, CT 06065? |
Randy- Gee-Emm has been DYING for those rear seat holddown brackets.I sent him a PM to let him know.
|
Randy, do you have availability of the support that goes from a NP205 t-case and the th350 bellhousing bolt? Thanks, Don :D
|
Randy
Other than dirt, how are door panels, i.e. no extra holes or chips in panels? thanks Gerry |
Rag n Rat- I pm'd you back
Jugernot, I'll look tonight 72 mario, I was just wondering what you meant by it, it didn't sound good, but no problem Big O, I'll try to get them off and sent with it, I was going tonight to ship Zyggy72, I'll get you a shipping price tonight 70 Blazin, nobody has spoken for them yet, Thanks for the help Dtilly, sorry not right now GM72k10, no chip or extra holes, a dab of white paint on the right one in pic but I think it will clean up. Let me look tonight for sure at them for holes and chips again. THANKS to ALL, Randy |
Glove box door is sold for sure and ac brackets are sold I think!!
I will be gone for a few days having our baby but stuff is still for sale on first come first serve, if you see something you want answer on here so I will know order of asking!! I will pm everybody that has asked about anything before I leave tonight. Sorry for inconvience, Randy:D :D |
All times are GMT -4. The time now is 10:27 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com