![]() |
C10/C20 Body Differences
I have a '62 C20 that I have pretty much had to replace Fenders, grill support, and radiator support with aftermarket items due to rust or other damage. Trying to do a dry fit right now and the holes just aren't lining up. Some more than an inch off......AM I missing something here? There's nothing I have found when going back and looking at what I ordered compared to the options available that had a different part number for a C10 over a C20.
|
Re: C10/C20 Body Differences
It could be the aftermarket components themselves.
How's your cab mounts and core support mounts? If those are missing or blown out, you'll have a hard time getting everything lined up too |
Re: C10/C20 Body Differences
Thankfully Cab and Core Support Mounts are in perfect condition. Thinking I just have to make it work. Not a big deal, just way more work than I hoped.
Quote:
|
Re: C10/C20 Body Differences
Yup, that's the unfortunate part of the full aftermarket parts.
A tip is don't tighten any bolts completely until you have every bolt in its home on all the panels. Then you can go back and tighten them all up |
All times are GMT -4. The time now is 06:20 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com