|
Re: offical lowered thread of standard cab pu, lets see them!
275/60/17 on the rear and 235/60/17 on the front
i would do a 315/35/20, but you will likely need a 10" wide wheel for that........you will need at least a 9-9.5 to go any larger than what you have and look right......just my opinion |
Re: offical lowered thread of standard cab pu, lets see them!
http://133.JPGhttp://032jpgHere it is with 275-45r20's all the way around with it lowered I cannot run a bigger tire on front but I might try a taller tire on the rear for the same look you have. The front is lowered with springs I like the look but the ride is not so good, but with my trailer on the back bumper the ride is great. I think I need to do more camping.
|
Re: offical lowered thread of standard cab pu, lets see them!
cant see the pics sir.......
|
Re: offical lowered thread of standard cab pu, lets see them!
2 Attachment(s)
Ok trying this again
|
Re: offical lowered thread of standard cab pu, lets see them!
wow old thread I posted in years ago, well here's mine
4/6 Belltech on 20" LTZ http://i75.photobucket.com/albums/i3...psbc026ab4.jpg |
Re: offical lowered thread of standard cab pu, lets see them!
1 Attachment(s)
my 05
|
Re: offical lowered thread of standard cab pu, lets see them!
1 Attachment(s)
Mine again. Bought it lowered last Nov. It rides okay until I hit bumps and then the differenatial hits bed and tires rub. Needs to be airbagged so I can have best of both worlds. I love this truck though. Hope to have it forever.
|
Re: offical lowered thread of standard cab pu, lets see them!
1 Attachment(s)
Here's my before and after. Sorry for the crappy pics - will do better next time :)
Before - 3" fabtech spindles and 2" rear blocks (lift) After - 2/4 Maxtrac spindles in front and hangers / shackles in the rear. Wheels - 2008 Chevy 18" with 265/60/18 Hancook |
Re: offical lowered thread of standard cab pu, lets see them!
a couple more of mine. shes fresh out of the paint booth.
https://fbcdn-sphotos-h-a.akamaihd.n...230d74f17548d6 https://fbcdn-sphotos-c-a.akamaihd.n...7c455c0c639250 https://fbcdn-sphotos-b-a.akamaihd.n...1ea7d1caf64605 |
Re: offical lowered thread of standard cab pu, lets see them!
2 Attachment(s)
Had front of my truck redone. WHoever owned it one time or another did a terrible job. Got it brought up an inch. Now it is a 4/7 drop. I like it alot.
|
Re: offical lowered thread of standard cab pu, lets see them!
1 Attachment(s)
My 2000 with a 4/7 drop.
|
Re: offical lowered thread of standard cab pu, lets see them!
Quote:
|
Re: offical lowered thread of standard cab pu, lets see them!
Thanks. I've actually considered removing the factory trim and replacing the mirrors with black front instead of the chrome front.
|
Re: offical lowered thread of standard cab pu, lets see them!
Quote:
|
Re: offical lowered thread of standard cab pu, lets see them!
Man I can't remember... Either a full coil or little over but I know at least a full coil
|
Re: offical lowered thread of standard cab pu, lets see them!
2 Attachment(s)
Update on my 01 silverado. 6/9 drop with 17's
|
Re: offical lowered thread of standard cab pu, lets see them!
1 Attachment(s)
02 sportside work truck with complete LS interior
2/4 with 275/55/20 tires |
Re: offical lowered thread of standard cab pu, lets see them!
|
Re: offical lowered thread of standard cab pu, lets see them!
what is stock height?
|
Re: offical lowered thread of standard cab pu, lets see them!
1 Attachment(s)
My latest project 2001 GMC sierra SLE 4.8 auto
bone stock 1 owner truck when purchased cam, stall and bolt on modifications ls1 out of a 2000 camaro sitting on the stand for the truck DJM 5/6 drop Centerline sniper 20 x 8.5 245/45/20 in front 275/40 in rear planning on keeping this one. |
Re: offical lowered thread of standard cab pu, lets see them!
1 Attachment(s)
|
Re: offical lowered thread of standard cab pu, lets see them!
|
Re: offical lowered thread of standard cab pu, lets see them!
|
Re: offical lowered thread of standard cab pu, lets see them!
This should be a sticky
|
Re: offical lowered thread of standard cab pu, lets see them!
4 Attachment(s)
|
| All times are GMT -4. The time now is 09:51 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com