The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Electrical (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=64)
-   -   Relay fuse block (https://67-72chevytrucks.com/vboard/showthread.php?t=824410)

lutronjim 08-01-2021 09:16 PM

Relay fuse block
 
I need more key switched and alway hot circuits. I keep reading that the extra goodies are working havoc on the crap switch ignition switches we get now.

I found one on Summit that gives 4 switched and 3 hot I like but it has wires from it and I would like one with spade connectors.

Painless Performance CirKit Boss Auxiliary Fuse Block/7-Circuit Kits (3 Constant/4 Ignition 12 V)

Anyone know of one with spade connectors?

Thanks

Caddylackn 08-04-2021 06:22 PM

Re: Relay fuse block
 
Just do a search on Amazon for Marine fuse panel. Get one with the lights that go on when the fuse is blown. Very handy. I would get two, one for key on accessories and another for always hot.

I put in a six circuit fuse panel in for the key on power but I feed the panel via a 30 or 40 amp relay tied to the battree so you are not trying to run all that amps through the ignition. The relay is triggered by the stock key on power wire. I have the radio, CB, and fuel pump going to this panel. When I add my MSD ignition I will power it off this fuse panel.

Richard 08-05-2021 04:52 PM

Re: Relay fuse block
 
A few posts down a guy had purchased one from here. https://www.online-led-store.com/fuse-boxes


All times are GMT -4. The time now is 04:37 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com