1970 K10 Shortbed stepside (not cut down) $5200
5 Attachment(s)
SOLD SOLD SOLD SOLD. THANK YOU EVERYONE!!
PRICE DROP TO $4,500. AS OF 11/29/2021 This truck was advertised recently but deal fell through. This is an original 1970 1/2 ton 4x4 SHORTBED with documentation to prove it. Not a cut down longbed. Very rare. Price is firm unless you want to offer me more. I have a clean title (in NYS this is called a transferable registration) with the correct VIN on it. The VIN tag on the cab matches the VIN label on the glove box, and the glovebox clearly says 115" wheelbase. The truck has 4x4, PS, PB and limited slip rear. The motor is NOT original to the truck. It is a 400 small block out of a 1975 K10. It is very tight and runs very nicely. When I first got the truck I planned on doing a complete restoration which is why I went west and found the cab-- but my life has taken a different direction due to cancer showing up in my wife. Priorities then changed radically and quickly. Leaking PS and AY transmission lines were replaced. It runs well, goes forward and back and stops but would need work to get it back on the road. last inspected 2020. All four tires match and are mounted on OEM GM ralley wheels. They hold air but are meant as rollers only. I have no caps or trim rings. Best use is for RESTORATION. It also has a limited slip rear end, 3.08 gears. The front grill obviously came from a 1971/72 Chevy, and it is in very nice shape. The front axle with the disc brakes probably came out of a 1972 truck. They look rough but the do work so that is a positive feature. Just a friendly word of advice: every piece of sheet metal is rusty. It will all have to be replaced. I have a rust-free cab and other parts that I will sell with this truck but that is another story for someone who will talk to me about actually buying this wonderful diamond in the rough. Please note the SANDBLASTED photos. Someone wanted to know how well the rust would clean up around critical parts such as the spring perches, and I would say it cleaned up very well. This is a SOLID FRAME. Can be seen in downtown Schuyler Lake, just outside of fabulous Cooperstown NY, 13326 I also have a red cab with both of its original uncut doors for sale that is almost rust free. It came from desert of California, I will sell it with the truck for additional $2100. I will not sell it by itself until or unless the buyer of this truck declines it. |
Re: 1970 K10 Shortbed stepside (not cut down) $5200
5 Attachment(s)
A few more photos. I am showing just one photo of the red cab. It is a very solid cab I have lots more. I am only showing one photo of a spring perch. I have others. I sandblasteed a few locations on the truck to see how well things cleaned up and I was quite impressed. This is a very solid frame.
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Interested in the cab if you decide to sell separately.Thanks Tom
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
3 Attachment(s)
Quote:
I wish someone could explain to me why my photos always show up different (sideways). Today they are all off by 90 degrees. They are upright when I post them, and I cannot figure out a way to make corrections. Thanks if you can help me out. __George |
Re: 1970 K10 Shortbed stepside (not cut down) $5200
great deal for some one ... my garages are full! not complaining! lol
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
3 Attachment(s)
Flip for you.
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Quote:
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Quote:
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Quote:
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Quote:
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Quote:
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Still interested in the cab,can be there in four hours with cash Thanks Tom
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Quote:
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
georgieb51: A bump up to the top and most importantly best wishes for your wife.
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Quote:
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Best wishes for your wife. Good luck on the sale of the truck. They are getting harder to find.
Ray |
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Nice it’s also a step side which makes it every rarer. Any chance the frame numbers but the steering box match the last 8 of the vin. Thanks much , Thomas
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Congrats on the sale. Best of wishes and prayers to you and your wife. If you’re ever so inclined on selling the 67 4x4, send me some pics and a price and I might be interested to coming out to Cooperstown in spring.
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
5 Attachment(s)
Quote:
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Looking good George,it was nice meeting you.Thanks for the cab.great deal. Happy New Year
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
George, looking for lots of odd and end parts for a couple builds. Your about 30 min from me. Send me contact info and I’ll get you a list. Thanks jay
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Quote:
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Quote:
|
Re: 1970 K10 Shortbed stepside (not cut down) $5200
Quote:
|
All times are GMT -4. The time now is 06:14 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com