The 1947 - Present Chevrolet & GMC Truck Message Board Network - Ppg dx-10flt

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Paint & Bodywork (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=16)

- - Ppg dx-10flt - ??? (https://67-72chevytrucks.com/vboard/showthread.php?t=826444)

SkinnyG

10-02-2021 05:16 PM

Ppg dx-10flt - ???

To those that know: do I need to stir this?

It says it's a paste, but the can has inches of liquid above the paste. Do I stir it?

mongocanfly

10-02-2021 06:15 PM

Re: Ppg dx-10flt - ???

1 Attachment(s)

I dont know for sure...but if its separated, I would think stirring it would be needed

Found this on ppg site..diff flattner though

SkinnyG

10-02-2021 08:23 PM

Re: Ppg dx-10flt - ???

Well, I did -not-mix it at first, since what I see in there is "paste" and I'm pretty sure if I mix it it will no longer be paste. I added to my paint for semi-gloss on the firewall, and it came out pretty much semi-gloss on the firewall.

Then I mixed it all up, because I'm kinda with you - I'd think it -should- be mixed.

I'll see what difference it makes when I spray the inner fenders.

All times are GMT -4. The time now is 05:57 PM.