cleaning aluminum intake
hows is the best way to clean an intake while still in the truck??
what products to use? thanks jamie |
Re: cleaning aluminum intake
You have to be careful what you get this stuff on but I used to use Eagle Mag cleaaner. It's an acid based wheel cleaner. A small brush and some water rinsing it off.
|
Re: cleaning aluminum intake
i use carb cleaner and some paper towels. sway on, wipe off. might not be the best idea to use one a hot engine though. chris.
|
Re: cleaning aluminum intake
I've used that SIMPLE GREEN with some success. Its used better to soak parts though
|
Re: cleaning aluminum intake
I would be careful with anything caustic if you have rtv for manifold to block seal.
|
Re: cleaning aluminum intake
What is it you are trying to remove? Grease and grunge (GUNK) gas always been good for this, or is it more severe built in stains like oxidation etc. In this case you may have to remove and get it glass beaded.
esll. :) Good idea is to clean your engine with Gunk and assess the situation from there.This would be the cheapest and you do not want a dirty engine and a clean intake. |
Re: cleaning aluminum intake
if u know where a blue beacon truck wash (for 18 wheelers) is and if it was off of the truck they have what is called brightner its for removing stains and polish off of aluminum i know i used it on mine i think theres one up there im also a superviser there
|
Re: cleaning aluminum intake
Quote:
|
Re: cleaning aluminum intake
If you just want to make it brighter, Bleach-White doesn't do a bad job.
Tooth Brush + Bleach-White. Wipe off with wet terry towel. DLB |
All times are GMT -4. The time now is 04:50 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com