67 C10 want to do coil over conversion.. bye bye air bags
 

anyone here in the suspension community have any ideas for me?

looking for 1" narrower arms with a coilover kit..removing air bags and dont have any room due to the wheel offset.
Thanks!!

Re: 67 C10 want to do coil over conversion.. bye bye air bags
 

You should only have 1 thread going at a time. It can get confusing.

http://67-72chevytrucks.com/vboard/s...d.php?t=827288


http://67-72chevytrucks.com/vboard/s...d.php?t=827289

Re: 67 C10 want to do coil over conversion.. bye bye air bags
 

anyone here in the suspension community have any ideas for me?

looking for 1" narrower arms with a coilover kit..removing air bags and dont have any room due to the wheel offset.
Thanks!!

Re: 67 C10 want to do coil over conversion.. bye bye air bags
 

Ridetech makes a coilover kit. I dont believe they offer a narrowed option though. You can go with the CCP modular spindles to get .5'' though.

The other option would be to go with any of the aftermarket full crossmember setups. Most will narrow the track width 1.5'' on each side. Modern steering, lighter, etc. Only issue is the cost.

Re: 67 C10 want to do coil over conversion.. bye bye air bags
 

Porterbuilt makes them, but you need their crossmember to keep the low ride height.
This will also center the front wheels in the wheel opening, which it looks like you need.

Look at this thread.

http://67-72chevytrucks.com/vboard/s...+blue&page=100

This is the lowest Porterbuilt ride height with coil overs.

Re: 67 C10 want to do coil over conversion.. bye bye air bags
 

I can tell you from first hand experience that GringoLoco’s truck rides and handles better than any stock frame static dropped truck that I’ve ever ridden in.