3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
5 Attachment(s)
SOLD, SOLD , SOLD! Price Dropped to $185 shipped CONUS.
The faces of these caps are in great condition - especially for a painted set. All the black paint lines remain unfaded and retains their crisp look. THERE ARE NO DENTS. The outer white paint has some chips. You can see it all in the pics as I tried to take clear ones. The pics below also focus in on the chips that exist to provide an accurate understanding of what you are getting. These are not perfect, but are as good as I have seen posted most places. Asking (...EDITED: $200 shipped). These have not been repainted, or retouched, in any way. All I did was wash them up and spray a little carnuba wax on them to seal up the chips. Only one has a chip on the center black circle. All have clean bowties. A closeup of that chip will follow in the second post. These hubcaps came off of an unmodified 1972 C20 Suburban that was sitting unused in NH for a long time. I realize that most say yellow bowties are '73 forward, and who actually knows, but these were taken off of a '72. Debate it all you want. As you will see in the pics of the backs, in the second post, there is a lot of surface rust due to sitting on the wheels for so long. There is NO rust through. |
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
5 Attachment(s)
Here are the additional pics. The last two shows the only chip in a center - one is a close-up.
I also took a close up of the worst spot on the back. I think this should be sanded and painted to prevent it from becoming worse. One of the other backs has 3 circles that are old spider egg sacs, not rust. All the backs have the number 326839 written on the back of them in black marker. Unsure if that is a part number or what. |
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
Interested what's the best you can do shipped to 46938 thanks
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
I will check on the shipping and get back to you ASAP. Thanks.
Marc |
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
Those are 73-up, but the blue bow tie is easy to paint on, as well as convexing the centers.
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
Quote:
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
Ok thank you
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
Quote:
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
Sorry I just got back to you I am going to pass for now thinking about it
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
Anyone else interested?
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
Still interested just can't get myself to pay the 240.00
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
Those are the deep dish for a full floater Dana rear end?
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
BADAZ, not sure if they are "deep dish" but they came off of a C20 Sub and fit on my K20 Sub (rear) which has a full floating rear end. If you want I can measure the depth and let you know tomorrow.
Bow ties, how about 200 and you send me a check so I don't have to float the paypal fee? |
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
They are for 16 or 16.5 dia stock c20/30 8 lug wheels. Doesn't have anything to do with width or ho vs dana. Nice caps! Edit: includes K20 also.
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
Quote:
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
Quote:
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
chewiebarker i would consider 175.00 and send you a m.o if this will do if not i understand thank you for your time
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
Quote:
Nice caps chewie, by the way. These will look great on someone's truck. |
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
Quote:
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
bowties, I cut you the break that I could. Maybe in a month if I haven't sold them I would be convinced to move some more. Or perhaps I will just cut holes in the front ones, spraypaint them silver, and put them on my K20.
BADAZ, I have seen some 12.5 inch caps from vans in the mid 70s that look like this but were more shallow. Perhaps those were what you had previously. Tonight, for fun, I will mount these on my 16' steelies with full floating hubs and post the pics up. |
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
I understand no problem i will think about tonite really would like to have them i want to take my chrome one's off
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
3 Attachment(s)
Here is a pic of the 16" steel wheels with full floating hubs (GM, not Dana - I think) on my '71 K20 Sub with the white cap and then with a banged up chrome cap.
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
2 Attachment(s)
Further out shot. White pops better I think, but the paint on the chrome one is faded. I am going to paint the chrome caps silver and repaint the spoke black and bowtie blue. :metal:
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
These hubcaps are from 73-75 when only 14-bolts were used. Wheels have nothing to do with it. All wheels are against the drum and hubcaps located in the same distance from the drum. The issue is how fr the hub protrudes. I've heard people have problems putting the concave 73-75s on Dana 60s,but I have the stainless ones on my '72 K2500 w/Dana 60. So,can't explain that one
|
Re: 3/4 ton, UNRETOUCHED, 12" dog dish hubcaps
My offer is good if you decide thanks thanks again
|
All times are GMT -4. The time now is 06:10 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com