Insight on Frame - 1971 Suburban 3/4 Ton
2 Attachment(s)
Newbie here!
I am considering a purchase of a 1971 3/4 suburban (and have a deposit on it) but have noticed some strange brackets (or something) on the frame. I am wondering if anyone here can identify what I am looking at in these pics and whether perhaps this frame is not original to the truck. Thanks! My guess it that it isn't original but I haven't seen enough frames to know. The brackets just hang there and don't seem to be integral - which makes me think they served a purpose on some other truck. I might be fine with that, I just want to be sure of what I am buying. The brackets can be seen in the pics extending off the side of the frame rails. Each have 2 rectangular holes through the center of them. They clearly are not supporting the body, or anything, so they appear foreign to me. Thanks a lot for any help/advice! |
Re: Insight on Frame - 1971 Suburban 3/4 Ton
Those were added on, possibly for mounting running boards.
|
Re: Insight on Frame - 1971 Suburban 3/4 Ton
Not original.
Perhaps, at one time, they had some steps or running boards installed |
Re: Insight on Frame - 1971 Suburban 3/4 Ton
Great! Thanks! So the frame could be original, but the brackets were bolt ons for running boards? I will confirm with the seller when I see it in person for the first time on Saturday.
I appreciate the heads-up and have enjoyed scouring the boards for information about these awesome trucks! I am excited to get started on my own Suburban project (with my sons) and hope to have a respectable rig someday to pass along. |
Re: Insight on Frame - 1971 Suburban 3/4 Ton
Welcome to the forum!
Like the previous comments, I agree that those are most likely from a running board installation some time in the burbs history. |
Re: Insight on Frame - 1971 Suburban 3/4 Ton
Was this the black one on eBay? Do you get it?
|
Re: Insight on Frame - 1971 Suburban 3/4 Ton
Yes, I did. Brought it home today.
|
Re: Insight on Frame - 1971 Suburban 3/4 Ton
Very nice good luck with it.did you have it shipped? Im looking for a good shipping company so I can get mine home by march 1st.
|
Re: Insight on Frame - 1971 Suburban 3/4 Ton
Thanks! Excited to get into this new project!
I did not ship it. It was only 3 hrs from my home, so I picked it up and drove it. It is clear from the ride that there is an issue with the powersteering (had to work hard to keep it from drifting out of the lanes) and I wonder about the robustness of the engine as there was not very good acceleration overall. Otherwise, it was pretty much what I expected from a 42 year old vehicle described as a "not perfect work truck" (I also think there is a fuel tank leak based on a quick look at it and the low gears of the 4wd are a bit crunchy). Looks like there will be a lot to do!! ;) |
Re: Insight on Frame - 1971 Suburban 3/4 Ton
Congrats on getting your new/old Suburban!
Start up a build thread, so that we can all check it out and follow along in your restoration! |
Re: Insight on Frame - 1971 Suburban 3/4 Ton
Thanks Chris! I will set one up once I have something to show for it. Going to be a slow go for a while until I set my mind on what I exactly want to do to it. Some of the build threads I have seen here are amazing.
|
All times are GMT -4. The time now is 08:35 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com