Passenger side cap
5 Attachment(s)
The passenger side front fender cap was gone on the 68 so I ordered one for it. I installed it today well the outside skin part anyway. After checking several places and making several marks I decided to cut it open and take the inside panel off of it. Most guy's cut it and sliced it open and had to put in a extra piece of metal. This way I didn't have to do any extra metal cuts. I'm glad I did it this way, it fit much better and now I can weld it back in when I get ready to start on the front end.:chevy:
|
Re: Passenger side cap
Looks like you’re getting the hang of it
|
Re: Passenger side cap
Quote:
|
Re: Passenger side cap
Andy, your finding out why it is called body work and not body fun. It is really both though, your doing fine.The last two i put on I split that inner piece into two sections by drilling out the spots it fit a lot better then. I went under the line and I used my green masking tape on the body line as a guide. Jim
|
Re: Passenger side cap
Nice .
Thanks for sharing. That will be my approach now. :ito: . |
All times are GMT -4. The time now is 08:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com