The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)
-   -   Aftermarket wiring harness (https://67-72chevytrucks.com/vboard/showthread.php?t=837060)

Hart_Rod 08-10-2022 01:03 PM
Aftermarket wiring harness
 
1 Attachment(s)
Does anyone make an aftermarket interior and body wiring harness for the OBS trucks? I know there are universal ones out there, but prefer to have an OEM style. TIA

Palf70Step 08-11-2022 07:01 AM
Re: Aftermarket wiring harness
 
I have not noticed any, but then again I have not had to look much either. Hopefully some others with more experience will chime in for ya Rob.

hatzie 08-15-2022 01:30 PM
Re: Aftermarket wiring harness
 
What's wrong with the factory harness?
If I run into a few damaged wires I just repair them.

If some butcher cut the radio plugs off get a cab harness from a salvage truck and either install it or cannibalize it.

Hart_Rod 08-15-2022 03:16 PM
Re: Aftermarket wiring harness
 
Quote:
Originally Posted by hatzie (Post 9112805)
What's wrong with the factory harness?
If I run into a few damaged wires I just repair them.

If some butcher cut the radio plugs off get a cab harness from a salvage truck and either install it or cannibalize it.
It sat in a hay field for 20 yrs, rats and squirrels feasted....

Palf70Step 08-15-2022 03:43 PM
Re: Aftermarket wiring harness
 
Only thing I saw was this



https://www.ebay.com/itm/125461366781

hatzie 08-15-2022 07:26 PM
Re: Aftermarket wiring harness
 
The year makes a difference. I would reccomend finding a cab harness from the same year truck.

Looks like you have an LS in the engine bay so you're going to have to make a hybrid engine bay harness.
GM separated the fuel tank, rear lamps, forward lamps, and wipers/engine at the bulkhead plug.

Hart_Rod 08-18-2022 04:06 PM
Re: Aftermarket wiring harness
 
Quote:
Originally Posted by Palf70Step (Post 9112852)
Only thing I saw was this



https://www.ebay.com/itm/125461366781
Thanks Bill!

Quote:
Originally Posted by hatzie (Post 9112929)
The year makes a difference. I would reccomend finding a cab harness from the same year truck.

Looks like you have an LS in the engine bay so you're going to have to make a hybrid engine bay harness.
GM separated the fuel tank, rear lamps, forward lamps, and wipers/engine at the bulkhead plug.
We have a Speartech harness coming for the engine/transmission (LT: L86/8L90). I'll probably end up using a universal harness and just rewiring the entire truck. Thanks for the input!


All times are GMT -4. The time now is 06:42 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com