Body side moldings - where to get a kit?
 

I know I could buy complete kits for the body side moldings for a SWB, but unable to find one for the Suburban. Anyone know where you can get a complete set? the one that runs around the wheel wells and down the sides even with the bumpers.

Re: Body side moldings - where to get a kit?
 

http://www.mar-k.com/
This is the only place I would buy trim from.
High quality parts.
No disappointments.

Re: Body side moldings - where to get a kit?
 

I agree, have loved the kits and the packaging on my previous builds. They don't list a kit per-se though. That is why I am asking.

Re: Body side moldings - where to get a kit?
 

Check out HartRod's SuperBurb build thread. I'm sure he has the information you want.

https://www.67-72chevytrucks.com/vbo...d.php?t=200387

Re: Body side moldings - where to get a kit?
 

They list a set for a 69-70 but say it's "in production"

https://www.mar-k.com/partDetails.aspx?LID=1128

Re: Body side moldings - where to get a kit?
 

They make the 67-68 style you are talking about for blazers,… I’m sure they could help you with suburban mouldings.
Give them a call.

Re: Body side moldings - where to get a kit?
 

67-68 shows in production as well. https://www.mar-k.com/partDetails.aspx?LID=13231

Re: Body side moldings - where to get a kit?
 

-
I think Mar-K custom made the ones for Robs Burb.

LockDoc

Re: Body side moldings - where to get a kit?
 

I just received 67-68 Mar-K lower trim for my Suburban (which is actually a 70 to which I am adding a 68 front clip and trim). Mark-K do not furnish clips for the 4 straight quarter panel pieces. What clips were correct for these and where can I buy them?
Thanks in advance for your help!

Re: Body side moldings - where to get a kit?
 

So, does anyone have the dimensions for the holes along the sides? Like specifications of distance between the holes, etc?

Re: Body side moldings - where to get a kit?
 

Mar-K makes some clips the attach using 3M tape so you don't have to drill holes.