Biggest tires that would fit well without rubbing?
Going to replace the tires on the 76 3/4ton soon, figured I might as well go a bit taller than last time. Just wondering what the tallest tire anyone had experience running without getting any rubbing in the turns was?
|
Re: Biggest tires that would fit well without rubbing?
is it a 2x4 or 4x4
|
Re: Biggest tires that would fit well without rubbing?
2x4, originally 454 now 4bolt 350, 14ff rear, camper special pkg with 9leaf springs...
|
Re: Biggest tires that would fit well without rubbing?
I run a 33x12.5x17, with a 2" lift spring and balljoint spacer. I have no problems with rubbing when turning and di not have to trim my fenders.
-vehicle:1977 c20 camper special, 3/4 ton, 2wd, with a 350 |
Re: Biggest tires that would fit well without rubbing?
i run 235/85/16 (about 32 inches tall) on my truck, no lift, and could fit bigger, but its a 2wd one ton
|
Re: Biggest tires that would fit well without rubbing?
Quote:
|
Re: Biggest tires that would fit well without rubbing?
235-85-16
|
Re: Biggest tires that would fit well without rubbing?
I have 285/75/16s on the rear of my C20.
|
Re: Biggest tires that would fit well without rubbing?
Checkout this fit table.
http://www.coloradok5.com/tirefitmenttable.shtml |
Re: Biggest tires that would fit well without rubbing?
Quote:
I've run 255/85-16 BFG's with no problem on stock rims. They are listed at 33.3". I would not put 10" rims on the truck, been there, done that. I have run 33/12.50's for more than 30 years on 8" rims with no lift or fender mods and no problems on many 1/2ton 4wd and 3/4ton 2 and 4wd GM square body trucks. I know some that have run a 34" Interco tire with good results. |
All times are GMT -4. The time now is 08:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com