1972 CST 2WD Blazer project
5 Attachment(s)
9/8/10
Tub (no tailgate), doors, front sheet metal (both 67/78 & 69-72), new body bushings, Single Wall Top: ** Sold to DPassmore ** Front buckets, center console, rear seat: ** SOLD to RustyBucket ** Ralleys: $100 Rolling Chassis (71/72 12 bolt rearend, New 2 1/2" dropped spindles, sway bar, steering box, trailing arms): $450 Front rear bumpers: ** Sold ** Or Solid 1972 CST 4x4 that is in the process of being converted to a 2WD. I have the original K5 title, vin plate and glove box. The tub is nearly rust free (it needs a small patch on the rear floor which I have). New rocker boxes, rockers, floorboards, windshield frame, automatic high hump, nice set of OEM wheel tubs. The tub is very nice and would not take much to have ready for paint. Solid doors, nice single wall top (with dome lights) and hatch. I have (2) 67 front fenders, (minor rust in the lower fenders) Nice 67, 67 core support, 67 hood (I also have two good 69-72 fenders with core support, straight 72 front bumper with lights that go with it). Complete set of CST blazer front buckets with nice console and factory rear seat w/ seatbelts (all mounting brackets for front and rear seats). New Western 2 1/2 dropped spindles, new rotors, 73-87 crossmember, 12 bolt trailing arm rearend, factory power steering box, factory swaybar, 4 - 15 x 8 ralleys, trailing arm setup in the rear (but needs to be finished), new body mount kit. I've got a bunch of other small stuff in boxes and bins such as: (a lot of the hard to finds blazer parts... seat brackets, dome light harness, metal carpet strips, top hold downs, rubber seals for the doors and windshield where they meet the top, visors and mounts). This would be perfect for a Porterbuilt front and rear dropmember, :D. $4500 o.b.o. I may eventually part out, but I'm going to try and sell as a package for right now. |
Re: 1972 CST 2WD Blazer project
I would like to see the glove box door and some pics of the interior .this could save me alot of time on my k5
Thanks Dave |
Re: 1972 CST 2WD Blazer project
5 Attachment(s)
Quote:
|
Re: 1972 CST 2WD Blazer project
Hey Rob is the Blazer in Pensacola?
|
Re: 1972 CST 2WD Blazer project
Quote:
|
Re: 1972 CST 2WD Blazer project
PM sent
|
Re: 1972 CST 2WD Blazer project
In your box of parts would you happen to have the fuel filler neck assembly. The part from the gas cap to where it ternimates under the bed and connects to the soft fuel lines?
|
Re: 1972 CST 2WD Blazer project
Quote:
|
Re: 1972 CST 2WD Blazer project
Quote:
|
Re: 1972 CST 2WD Blazer project
3 Attachment(s)
Quote:
*** Here's a picture of the glovebox SPID. |
Re: 1972 CST 2WD Blazer project
Looks great will have to pass Funds are low Thanks
|
Re: 1972 CST 2WD Blazer project
Have to sell things soon
|
Re: 1972 CST 2WD Blazer project
Quote:
Quote:
R/ |
Re: 1972 CST 2WD Blazer project
Would you consider getting rid of the Body/frame?
|
Re: 1972 CST 2WD Blazer project
Quote:
|
Re: 1972 CST 2WD Blazer project
I forgot to mention that the frame has a new body mount kit also...
|
Re: 1972 CST 2WD Blazer project
Still up for sale!!!
|
Re: 1972 CST 2WD Blazer project
Surely someone wants a nearly rust free blazer??? It would really stink to have to part this.......:).
|
Re: 1972 CST 2WD Blazer project
Well I will just say that it's a good thing I am moving soon..... Hopefully someone will pick this up soon.
|
Re: 1972 CST 2WD Blazer project
Quote:
|
Re: 1972 CST 2WD Blazer project
Quote:
|
Re: 1972 CST 2WD Blazer project
I seen it in person and it is very nice. If I didnt have so many projects I wouldve grabbed it. But if Rob decides to give it to me then I will find a place to park it! :)
|
Re: 1972 CST 2WD Blazer project
Are you parting it out?
I need 15in trim rings for the rallys. |
Re: 1972 CST 2WD Blazer project
Quote:
Quote:
Quote:
|
Re: 1972 CST 2WD Blazer project
pm u
|
All times are GMT -4. The time now is 08:14 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com