The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=220)
-   -   350 sbc question! (https://67-72chevytrucks.com/vboard/showthread.php?t=732807)

Tdbengry 03-14-2017 09:48 PM

350 sbc question!
 
Hello everyone, new to the fourm I've got a 67 c20 long bed that had a 283 gone grenade. I picked up a 68 350 4bolt that's been bored +.040 over I'm trying to determine if I can just hone and go or if I need another block to build for daily driving. Any suggestions welcome!

68c10airstream 03-15-2017 11:54 PM

Re: 350 sbc question!
 
Welcome aboard, i believe those older blocks with the high nickel content can safely be bored to.060, or find another 350 from the 60's/70's.

phat69 03-19-2018 09:28 PM

Re: 350 sbc question!
 
you can do .060 over as long as you aren't trying to make a lot of power.

bob arrington 08-07-2021 07:21 PM

Re: 350 sbc question!
 
if its not apart, hang a starter on it and check compression


All times are GMT -4. The time now is 11:58 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com