Kick Panel Vent
 

Hi all. Hope you can help.
What goes on the inside kick panel from the slotted vent? Is it just left empty or was there an internal vent cover, or was it connected to an air system of some sort.
We’re just doing the interior on our Suburban and not sure what to do in this area.

Re: Kick Panel Vent
 

the deluxe or fresh air heater bolts up to that and has a flap so you can adjust recirculation vs outside air

Attachment 2334073


for the standard heater or no heater models there was a plate to cover the hole as well as the round hole where deluxe heater motor would penetrate firewall

Attachment 2334074

Re: Kick Panel Vent
 

hmm, that first picture I posted does not have the air control flap

like this
Attachment 2334075

Re: Kick Panel Vent
 

Thanks mate .. looks like a plate for us then. The chances of finding an air unit are just about nine in England 😄👍🍻

Re: Kick Panel Vent
 

i can't find the photo that i took of that plate right now but here it is over on the right photobombing the vent handle.

that is where the deluxe fresh ait heater has it's fresh air intake normally or the tin goes over it. a couplr of vendord sell them but i would just take a
piece of thin cardboard or stiff card stock and make a pattern and make one if i couldn't get one off a local donor. the cost of the panel plus shipping is too much for something you can make in 30 minutes.

Re: Kick Panel Vent
 

Second photo of heater is late 53 54 and 55 First series heater . Earlier versions did not have the door.

Re: Kick Panel Vent
 

early fresh air heaters didn't have that door. i'm not sure 54/55.1 chev did.