por-15 vs powder coating
hey guys.. im knee deep into my resto.. and im at the point where i need to get my frame coated/painted...having trouble deciding which way to go...been doing research and i wanna know what yall guys think... i would apprciate any advice ..tips opinions yall got thanks
|
Re: por-15 vs powder coating
Powder coat is 100x better than Por15. It will actually adhere.....
|
Re: por-15 vs powder coating
If you can afford to powder coat it go for it,If its done right it will look like glass nice and smooth.Por15 will be a lot cheaper but the finish on it is kinda rough vs powder coating.Both will be rock hard once cured and take a beating.If its going to be a show truck powder coast it if its just a normal truck por15 it no one will see the frame.
|
Re: por-15 vs powder coating
I stripped my frame bare, applied por15 and top coated it with a satin. It laid down great and is just as durable in my opinion... if done right. I spilled brake fluid, pwr steering fluid, trans fluid, you name it on the frame and it wipes right off with no peeling.
I agree, if it's a show truck powder coat. If not, por15 will work great. Just make sure your frame is clean of dirt, grime, etc. And top coat it! |
Re: por-15 vs powder coating
thanks for the tips guys...
|
Re: por-15 vs powder coating
Blast, prime, paint. No POR.
|
Re: por-15 vs powder coating
you can always sand/blast it and paint it with a good enamel paint
|
All times are GMT -4. The time now is 06:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com